Laserfiche WebLink
i • <br /> • Stick-gauge each tank to verify that the amount of product ordered can be delivered <br /> without overfill. If the load won't fit, make no delivery -- call your su eo rvisor! Only <br /> unload product into specified storage facilities. <br /> • Inform the operator at the facility that the load ordered must fit into the tank or no <br /> delivery will be made. No exceptions! <br /> • Install the four-inch tight-fill delivery elbow at the tank fill and check for proper seal. <br /> • Connect to tanker unloading valve and check for proper connection. <br /> • Place drip pan below connection point at tanker. <br /> • If delivery is going into manifolded tanks,the amount delivered must be split between the <br /> tanks. The fill cap must not be removed while the other tank is being filled. <br /> • After connections are made, select compartment and start flow slowly; immediately <br /> check sight glasses to be certain of correct product. <br /> • Remain by unloading valves during the entire unloading process. <br /> • Check sight glass to make certain compartments have completely drained. <br /> • Drain product hoses to avoid spills. <br /> • Close internal and butterfly valves. <br /> • Disconnect and again drain hoses. <br /> • Stow all hoses and connections securely. <br /> • Secure all tank fill caps. <br /> • Make a tour around the truck unit to observe the possible presence of people, cars, <br /> bicycles, or other obstacles that would make movement of vehicle unsafe. If backing is <br /> required,get assistance whenever possible. <br /> 10199.002.dm[ENIbUdm] <br />