Laserfiche WebLink
��-- =age <br /> Installer menu: PIN XXXX (default) =age 6/12 <br /> Set Min Stock This feature is not used on the Costco Additive Select Product: <br /> Dispensing System. Tankl 1 <br /> Tank2 2 <br /> Default value is 000000.00 GAL I 3 <br /> Innactact ive 9 <br /> Changing the default value will result in unwanted <br /> stock level warnings. <br /> Input Minimum <br /> Stocklevel: <br /> Tank 1 1 <br /> 000200.00 GAL <br /> Set Mode Operation mode should be set to"Pre-Select for Select Product: <br /> all tanks. This parameter should not be changed. Tankl 1 <br /> The parameter must be set for EACH tank. Tank2 2 <br /> Tank3 3 <br /> Inactive 4 <br /> ----------------- <br /> Operation Mode 1 <br /> ----------------- <br /> Pre-select 1 <br /> Free Dispense 2 <br /> Initial Tmeout Defines the delay between the pump start and the Select Product: <br /> valve actuation to begin the dispense. Default is Tankl 1 <br /> 20 seconds to allow the leak detector(not part of Tank2 2 <br /> this system)to obtain a stable reading.The time Tank3 3 <br /> must be set for EACH tank. Inactive 4 <br /> Select a product and confirm with"OK" <br /> or return with'QuiY. <br /> ----------------- <br /> Timeout: 020 <br /> Enter the new timeout and confirm with"OK ------ <br /> or return with"Quit". in Seconds <br /> from 0-255 <br /> Inactive Tmeout If the pulse input from the meter stops before the Select Product: <br /> preselected quantity has been reached,the Tankl 1 <br /> system will wait for the defined time before the Tank2 2 <br /> batch stops and the valve closes(default 6 sec). Tank3 3 <br /> This will not occur during normal operation. The Inactive 4 <br /> timeout must be set for EACH tank. <br /> Select a Tank and confirm with"OK' <br /> or return with"Quit. <br /> Timeout: 006 <br /> ----------------- <br /> Enter the new timout and confirm with"OK" in Seconds <br /> or return with"Quitfrom 0-255. • <br /> \..i LMS—Baby System <br />