Laserfiche WebLink
Preparation Piping Sump Sensor Installation <br /> Preparation <br /> t <br /> Improper connection of this device at the console and working with <br /> live electrical wiring can be hazardous. <br /> Electrical shock resulting in serious injury or death may occur. <br /> Disconnect power at the console before installing this device. Ensure <br /> r" that the device is properly connected at the console per startup and <br /> Installation instructions before applying power. <br /> 1. Turn OFF the AC power to the console. <br /> Important m Do not install the piping sump sensor if there is any liquid in the piping surnp. Failure to <br /> comply can result in undetected potential environmental and health hazards. <br /> 2. Make sure no liquid exists in the piping sump. <br /> 3. Go to the appropriate mounting procedure.The mounting instructions are divided <br /> into two separate procedures for mounting the sump sensor to horizontal piping or <br /> conduit,or to vertical piping or conduit.Choose the correct procedure for your <br /> ® installation. <br /> 4. Barricade area where you will be working. <br /> 6 <br />