INSTALL_2019 - Laserfiche WebLink

Home Browse Search

Veeder-Root Line Leak Application Guide Supported Pipe Types and Line Lengths* - For DPLLD, PLLD and WPLLD (Continued) *lengths approved are for 3.0, 0.2, & 0.1 gph line leak tests using single pipe types. For mixed line types with DPLLD or PLLD, see footnote 1 and 6 respectively. TSMAD - DOUBLE WALL 1.5 INCH 30-1100 30-1100 No 18900 0.092 2INCH 30-1100 30-650 No 12500 0.163 3INCH 30-749 30-300 No 28200 0.367 TSMAXPD - DOUBLE WALL 1.5 INCH 30-1100 30-1100 No 15500 0.092 2INCH 30-1100 30-650 No 9200 0.163 3INCH PETROTECHNIK 30-749 30-300 No 27800 0.367 FLEXIBLE PIPE - 10-1100 10-1100 No 2500 0.092 PETROTECHNIK UPP EXTRA (63 mm) 20-1100 20-650 No 11,500 0.163 ENVIROFLEX RETRACTABLE PIPE PP1500 (1.5 INCH) 10-1100 10-1100 10-500 2400 0.092 PP1501(1.5 INCH) 10-1100 10-1100 10-500 3500 0.092 PP1502 (1.5 INCH) 10-1100 10-1100 No 7300 0.092 PP1503 (1.5 INCH) 10-1100 10-1100 No 2500 0.092 PP2500 AND PP2501 (2.5 INCH) No No No -- PP2502 (2.5 INCH) 10-1078 10-430 No 8700 0.255 PP2503 (2.5 INCH) 10-1078 10-430 No 3100 0.255 OMNIFLEX COAXIAL PIPE CP1501(1.5 INCH) 10-1100 10-1100 10-500 13,000 0.092 CP1503 (1.5 INCH) 10-1100 10-1100 No 4500 0.092 CP2503 (2.5 INCH) 10-1100 20-430 No 3900 0.255 1Mixed Piping Types with PLLD: Using TLS -350 software Version 23 or later, PLLD is certified for 3 gph-only testing for line volumes up to 212 gallons; and for 0.2/0.1 gph testing for line volumes up to 110 gallons. To determine the line volume for mixed piping types, multiply the line length (in feet) times the 'gal- Ions/foot! value for each pipe type and add the results. For example, site has 150 feet of 2" fiberglass and 50 feet of 3" fiberglass pipe: Total line volume = [150 x 0.204] + [50 x 0.461] = 30.6 + 23.1= 53.7 gallons 2The 0.2 and 0.1 gph line leak tests cannot be run on flex piping with WPLLD. 313ulk Modulus entry is only applicable to TLS -350 consoles w/software Version 23 or later and all TLS -450 Series consoles. Refer to TLS -350 System Setup manual (P/N 576013-623) or TLS -450 Setup Manual (P/N 576013-940) for programming instructions. 4Geoflex piping produced prior to 2001 has a lower bulk modulus than the current product. For this piping (pre -2001) use the values in (). For 2001 piping and later, you must set the correct Bulk Modulus in the "User Defined" menu. 5Western Fiberglass COFLDC piping produced prior to 2005 has a different bulk modulus than the current product For piping produced prior to 2005, use the values in ( ). 61-ine lengths shown represent DPLLD approved lengths for 0.2/0.1 gph testing. 3.0 gph-only testing for DPLLD is certified for line volumes up to 535.6 gal- lons (not to exceed 1100 feet of line. See footnote 1 for instructions on calculating line volume for mixed piping.