Laserfiche WebLink
Overfill Protection System (spill catchment basin(s) required) <br />A. Nonmotor vehicle fuels (See Option IA) <br />1. Level sensing device and 12 or /3 below <br />2. Audible/visual alarm triggered to liquid level sensor <br />3. Automatic shut-off device <br />B. Motor vehicle fuels only <br />I. Manual monitoring <br />-a. Written filling�f< <br />procedure provided-- <br />b. Procedure addresses all of the following: <br />1 Visual monitoring of fuel level and filling operation <br />2 Available caacity of tank is at 103% or +200 gallons--ok <br />(2635. 9) (AM)(C)) <br />3) Metered input <br />C. Spill catchment basin size y <br />1. Minimum 5 gallons c,.•r __. f-� <br />A4c ��orr' ,w <br />10. Secondary containers (Includes ieak interception and detection systems). <br />Backfill in secondary container -(*Article 3, Section 2635) <br />1. See Article 3 Section 2635(c) (1-8). <br />Two or more -primary containers within secondary container (Demonstrate <br />product compatibilities). <br />Liquids detected in secondary containment must be sampled and analyzed for <br />hazardous substances. (Article 3, Section 2635(6) and Health and Safety <br />V Code 25291(e)(h). <br />0. Water tight cover for secondary container excavation (Article 3, Section <br />)) <br />11. Piping <br />A. Double containment required for: <br />1: Product and vapor recovery lines. <br />2. Vent line (excluded only if ball <br />T <br />float valve is installed). <br />6- d,-' ���� <br />