Laserfiche WebLink
FXV Leak Detectors - Installat • Instructions <br /> FX1 V Part No. 116-056-5, FX2V Part No. 116-057-5 <br /> Fx1 DV Part No. 116-058-5, FX2DV Part No. 116-059-5 <br /> Safety Precautions <br /> The following defined terms are used throughout this literature to bring attention to the presence of hazards of <br /> various risk levels, or to important information concerning the life of the product. <br /> Indicates presence of a hazard Indicates presence of a hazard which will or <br /> which will cause severe personal can cause minor personal injury,death or <br /> injury,death or substantial property substantial property damage if ignored. <br /> damage if ignored. <br /> Indicates presence of a hazard .® Indicates special instructions on installations, <br /> which can cause severe personal operation,or maintenance which are <br /> injury,death or substantial property important but not related to personal injury <br /> damage if ignored. hazards. <br /> Before installing leak detector, review the application section in leak detector manual <br /> #5191 for limitations or restrictions on usage. <br /> This instruction sheet should be kept with the end user of the leak detector for reference. <br /> When using 117-182 Big-Flo Diaphragm Valve, refer to installation instructions#042- <br /> 108-1 included with the valve. When using an FXV model leak detector with adapter <br /> housing #038-072-5, refer to installation instructions#041-415-1 included with the <br /> housing. FXV Leak Detectors are for use with all UL-listed 4-inch Red Jacket models <br /> containing a"P" or"AG" prefix; FE Petro UL-listed 4-inch "STP" models;Tokheim UL- <br /> listed 4-inch models—585A-34 and 585A-150. <br /> Tampering with the screws or seals on this leak detector may inhibit operation and will <br /> void warranty. <br /> This Red Jacket leak detector is to be installed into the two-inch threaded tapping on top of the Red Jacket <br /> submersible pump.The FXDV models are specially designed for use with diesel fuel and should be used in <br /> diesel applications to provide the appropriate operating characteristics. For proper installation,the following <br /> steps should be followed in sequence. <br /> 1 <br />