INSTALL 2019 - Laserfiche WebLink

Home Browse Search

North America 17115 San Pedro Ave. Suite 200 San Antonio. Texas 78232 USA Phone: 210 477 7500 Testing: Installed pipe systems should be tested prior to use to assure soundness of all joints and connections. Locate pressure gauge in close proximity to the pressurizing equipment, not directly on the piping system. A pressure gauge with the test pressure at mid -scale is recommended. National Oilwell Varco has produced this brochure for general information only, and it is not intended for design purposes. Although every effort has been made to maintain the accuracy and reliability of its contents, National Oilwell Varco in no way assumes responsibility for liability for any loss, damage or injury resulting from the use of information and data herein nor is any warranty expressed or implied. Always cross- reference the bulletin date with the most current version listed at the web site noted in this literature. South America Estrada de Acesso A Zona Industrial Portuaria de Suape, s/no. Recife, PE, Brazil 55.590-000 Phone: 55 31 3501 0023 C UL US LISTED Bending RED THREAD IIA PIPE PROPERTY psi @ 75T MPa @ 24°C psi @ 150°F MPa @ 66 Axial Tensile (ASTM D2105) Feet 102 153 195 287 Meters Ultimate Stress 9,530 65.7 7,763 53.5 Modulus of Elasticity 1.68 x 106 11,584 1.52 x 106 10,508 Axial Compression (ASTM D695) Ultimate Stress 12,510 86.3 10,140 69.9 Modulus of Elasticity 0.68 x 106 4,668 2.54 x 10' 17,546 Beam Bending (FGSTM) Ultimate Stress 20,200 139.3 17,320 119.4 Long Term per ASTM D2925 2.6 x 106 17,927 1.15 x 106 7,929 Hydrostatic Burst (ASTM D1599) Ultimate Hoop Tensile Stress 40,150 276.8 37,948 261.7 Coefficient of Linear 0.85 x 10-5 in/in/°F Thermal Expansion (FGSTM) 1.53 x 10-5 mm/mm/°C Specific Gravity 1.8 Flow Factor Hazen -Williams Coefficient 150 North America 17115 San Pedro Ave. Suite 200 San Antonio. Texas 78232 USA Phone: 210 477 7500 Testing: Installed pipe systems should be tested prior to use to assure soundness of all joints and connections. Locate pressure gauge in close proximity to the pressurizing equipment, not directly on the piping system. A pressure gauge with the test pressure at mid -scale is recommended. National Oilwell Varco has produced this brochure for general information only, and it is not intended for design purposes. Although every effort has been made to maintain the accuracy and reliability of its contents, National Oilwell Varco in no way assumes responsibility for liability for any loss, damage or injury resulting from the use of information and data herein nor is any warranty expressed or implied. Always cross- reference the bulletin date with the most current version listed at the web site noted in this literature. South America Estrada de Acesso A Zona Industrial Portuaria de Suape, s/no. Recife, PE, Brazil 55.590-000 Phone: 55 31 3501 0023 C UL US LISTED Bending Radius, Minimum Nominal 2" 3" 4" 6" Pipe Size 15/4.57 22-25/6.7-7.62 Feet 102 153 195 287 Meters 31.0 46.5 59.5 87.4 ASTM D2996 Designation Code 2"-6" 1 RTRP-11AWl-3110 Pipe Lengths Available Size In Feet/Meters Standard Random 2-6 15/4.57 22-25/6.7-7.62 EurODe Asia Pacific Middle East PO Box 6, 4190 CA No. 7A, Tuas Avenue 3 P0. Box 17324 Geldermalsen The Netherlands Jurong, Singapore 639407 Dubai, UAE Phone: 31 345 587 587 Phone: 65 6861 6118 Phone: 971 4881 3566 www.igspipe.com fgspipe@nov.com K91F Fiber Glass Systems c 2014 National Oilwell Varco. All rights reserved. FH1200 - December 2014