WORK PLANS - Laserfiche WebLink

Home Browse Search

♦ It is the responsibility of the SHSO to annotate the Site Plan with the Traffic Guidance and Control configuration if a "formally developed" Traffic Guidance and Control Plan is not available. It is also the responsibility of the SHSO to disseminate.the Traffic Guidance and Control information to all site personnel during the Daily Production Safety Meeting and any other time as necessary. Work on this project will be conducted during the hours: Start: 6:00 AM End: 6:00 PM Monday -- Friday Daily Production Safety Meeting A safety meeting will be conducted in the morning on each working day on the site to discuss the health and safety issues for the activities to be conducted that day. The topics of the meeting will include, at a minimum, general health and safety procedures, reviewing heath and safety policies and,reviewing the job hazard .analyses for the tasks to be conducted. Additional safety meetings may be conducted if the scope of work changes during the day, or if other health and safety issues are identified. Suggested meeting topics and daily meeting log sheets are included in Attachment 11. 3 , Hazard Communication All employees at the Site must review this site wide-HASP prior to field activities: The information in the JSAs and the attached data sheets is made available to all employees who could be affected by it prior to the time they begin their work activities. Modifications to JSAs and the accompanying data sheets. are communicated during routine briefings. Consistent with OSHA regulations, STANTEC must also inform other contractors and subcontractors about the nature and level of hazardous substances at this site, and the likely degree of exposure to workers who participate in site operations. Evacuation Information Randomly ilscheduled evacuation drills may be conducted at any time during field activities. Employees should follow emergency procedures outlined in Section 4+of this HASP and discussed during the day's daily production safety meeting. Shutoff valves/switches for utilities and products: It is the responsibility of the SHSO to annotate the Site Plan with the location of all shutoff valves and switches and to disseminate that information to all site personnel during the Daily Production Safety Meeting and any other time as necessary. Personal Protective EQuiiment The site-specific Personal Protective Equipment (PPE) ensembles and materials are identified in the Job Safety Analysis (JSA) sheets located later in this section. The PPE ensembles listed in each JSA has been identified as appropriate to protect the worker for the task addressed. The PPE ensembles are consistent with Appendix B of 29 CFR 1910.120. PPE is to be used in accordance with manufacturers' recommendations. Personal Safety Concerns and Precautions: "There are no other safety concerns associated with this site other than those normally encountered on a hazardous waste site." STANTEC consulting Corporation 13-2