Laserfiche WebLink
w..e <br /> L-nseco <br /> :V IJtllv114 11M�JA\' <br /> I Sample Description <br /> See the attached Sample Description Information. <br /> The sample was received under chain-of-custody. <br /> I Analysis Reguest <br /> J, <br /> The following anzlytical tests were requested. <br /> Lab ID Analysis Description <br /> 058083-0001 Volatile Organics <br /> Semivolatile Organics <br /> III Quality Control <br /> A. Project Siiecific OC. No project specific QC (i.e., spikes and/or <br /> duplicates) was requested. <br /> B. Method Blank Results. A method blank is a laboratory-generated <br /> sample which assesses the degree to which laboratory operations <br /> and procedures cause false-positive analytical results for your <br /> sample. <br /> No target parameters were detected in the method blanks associated <br /> .lith your sample at the reporting limit levels noted on the Method <br /> Blank Report. <br /> F <br /> C. Laboratory Control Samples - The LCS program <br /> Duplicate Control Samples. A DCS is a well-characterized matrix <br /> (blank water, sand or celite) which is spiked with certain target <br /> parameters and analyzed at approximately 16% of the sample load in <br /> order to establish method-specific control limits. The DCS <br /> results associated with your sample are-on the attached Duplicate <br /> Control Sample Report. <br /> Single Control_Sample. An SCS.consists of a control matrix that <br /> is spiked with surrogate compounds appropriate to the method being <br /> used. In cases where no surrogate is available, (e.g. metals or <br /> conventional analyses) a single control sample identical to the <br /> DCS serves as the control sample. An SCS is preparee for each <br /> sample lot. Accuracy is calculated identically to the DCS. The <br /> SCS results associated with your sample are on the attached Single <br /> Control Sample Report. <br /> �v <br /> i <br /> t <br />