Laserfiche WebLink
r <br /> Ense 0 <br /> A G3rnmc�omp.n. . <br /> Accuracy is measured b, Percent Recovery as in: <br /> 9, recovery - Leasured concentration) x 100 <br /> (actual concentration) <br /> Precision is measured using duplicate tests by Relative Percent Difference <br /> (RPD) as in: <br /> RPD a Lrecovery test 1 - % recovery test 2) x 100 <br /> (% recovery test 1 + % recovery test 2)/2 <br /> Control limits for accuracy (percent recovery) are based on the average, <br /> historical percent recovery +/-3 standard deviation units. Control limits <br /> for precision (relative percent difference) range from 0 (identical <br /> duplicate DCS results) to the average, historical relative percent <br /> difference + 3 standard deviation units. In cases where there is not <br /> enough historical data, EPA limits or advisory limits are set, with the <br /> approval of the Quality Assurance department. <br /> IV- Analysis Results <br /> Test methods may include minor modifications of published EPA Methods such <br /> as reporting limitsor parameter lists. Reporting limits are adjusted to <br /> reflect dilution of the sample, when appropriate. Solid and waste samples <br /> are reported on an "as received" basis, i.e., no correction is made for <br /> moisture content, unless the method requires or the client requests that <br /> such correction be made. <br /> Results are on the attached data sheets. <br />