Laserfiche WebLink
30 January 2014 <br /> AGE Project No. 99-0682 <br /> Page 24 of 28 <br /> during pumping or bailing , and to maximize the efficiency of ISCO injections . As built <br /> diagrams of the proposed designs of the injection wells have been included as Figures 16 <br /> and 17 . <br /> REMEDIATION WELL INSTALLATION REPORT OF FINDINGS <br /> A report documenting the findings of the remedial well installations and development will <br /> be prepared following performance of field work and receipt of all applicable data . The <br /> report will include a description of work performed and the results of sampling and analysis . <br /> Conclusions and recommendations will also be included , if applicable in the report. All <br /> reports will be in a format acceptable to the EHD and CVRWQCB , and will be reviewed <br /> and signed by a California Professional Geologist. <br /> ISCO APPLICATION <br /> Upon regulatory approval , AGE will conduct four initial tri-weekly ISCO applications utilizing <br /> wells MW-1A, MW-1 B , MW-6, MW-7, MW-8 and the nine proposed injection wells. A 5% <br /> solution of hydrogen peroxide will be applied to each well during the proposed four tri- <br /> weekly events. Baseline/background and progress sampling will be performed using wells <br /> MWAA, MW-6, MW-7, MW-8 and MW-10 . Additionally, post-ISCO sampling will be <br /> conducted two months following the performance of the final injection event. Field <br /> parameters and laboratory samples will be collected and analyzed as described below: <br /> Field Parameters : <br /> • Depth to water will be measured in shallow and intermediate groundwater <br /> monitoring wells MWAA, MW-6 , MW-7, MW-8 and MW-10 . <br /> • Prior to each purge volume, temperature , pH , TDS , oxygen reduction potential <br /> (ORP), salinity, turbidity, and dissolved oxygen (DO) will be recorded at the <br /> monitoring wells. <br /> Laboratory Testing : <br /> • Total petroleum hydrocarbons quantified as gasoline and diesel (TPH-g and TPH-d) <br /> by EPA method 8015 modified ; <br /> • Benzene, toluene, ethylbenzene and xylenes (BTEX) by EPA method 8260B ; <br /> • Volatile organic compounds by EPA method 8260B ; <br /> Advanced GeoEnvironmental, Inc. <br />