Laserfiche WebLink
131 Gluina F -Series Electrical to Sump Wall <br />13.1) For F -1X -RR fitting models and your PVC -Coated ROBROYT"' Brand Conduit, or your F -1X - <br />SS fitting models and galvanized condit should be clean and COMPLETELY DRY AT ALL TIMES. <br />All pre -abraded or milled areas should be inspected for debris and inconsistencies. No dirt, grit, <br />water or other foreign material should be on or inside the fiberglass fitting components. <br />USE SMITH TM ADHESIVE # 7069 or 8069 <br />or AMERONTM PSX-20 8oz ONLY <br />B.2) Get one clamping tool ready for each <br />fitting installation. <br />B.3) Follow your adhesive <br />manufacturer Instructions to mix and <br />apply your adhesive. One bag of provided <br />fiberglass filler is to be fully mixed with each <br />adhesive kit. (Pg. 4) <br />DO NOT ATTEMPT TO MIX MORE <br />THAN ONE KIT AT A TIME. <br />BA) Main body first - carefully apply a <br />generous amount of adhesive to the wall and the <br />face that will meet the wall (Fig. 1134). <br />GENEROUSLY APPLY ADHESIVE TO THE <br />FACE OF THE FLANGE AND THE <br />CHANNEL ON THE INSIDE <br />Generously apply mixed <br />adhesive to the flange <br />Adhesive <br />Fig. B4 hes4ive <br />OUTSIDE <br />i <br />6 ii -F -Series -1 X -SS -11 A <br />