COMPLIANCE INFO - Laserfiche WebLink

Home Browse Search

Williams `dank sines - Stockton, CA If Measures listed in 40 CFR 112.7(c) are not Practicable 40 CFR 112.7(d) All measures noted in 40 CFR 112.7(c) are practicable,are in place,in use and no items need to be addressed in 40 CFR 112.7(d). Inspections, Tests & Records 40 CFR 112.7fe1 Alloil product handling employees of Williams Tank Lines will be trained to observe the aboveground storage tanks,valves, associated pumps,aboveground piping,oil drum storage area, and dispensers for potential problems. If a problem is observed, the'employee.shall inform management, who will in turn take the necessary action. 'Phe forms found in Appendix B, C, and D are to be used to record the inspections. All aboveground storage tanks, valves, aboveground piping, spill control areas, secondary '.. containment, and emergency response equipment and supplies shall be inspected monthly by Williams Tank Lines' employees. Each inspection shall be recorded, dated,signed,and placed in the appropriate Appendix of this SPCC Plan. All items requiring attention will be noted and corrective action taken before the item is deemed to be in compliance, The dispensing area is inspected monthly and any defects, spills,',or stains are reported to management for corrective action. All vegetation is controlled and no vegetation is allowed to grow in the firet oil products containment system.Combustible garbage type and debris are also controlled and no accumulation is permitted in the oil product storage and containment areas. Preventive maintenance actions are incorporated into Williams Tank Lines' operation and housekeeping measures are established. All leaves, branches and garbage have been maintained around the fuel tanks. Tanks are labeled to show the oil product that they contain and to express the reactivity and hazard of the oil product within the storage tank. No tank is allowed to sit on the ground with - direct contact to soil. All surfaces of the oil product tanks can be and are inspected monthly for possible compromise to their integrity. Any and all testing and certification records, as appropriate, will be maintained in this SPCC Pian for five years or in the appropriate maintenance report log for the regulatory agency that has jurisdiction on the testing requirements. Certified Testing occurred on May 5, 2015, and #2 Diesel Fuel tank passed its initial testing. Testing will occur on a five-year cycle. A Certified SP001 Inspector will perform the required testing and testing will be conducted in accordance to the Industry Standards found in the Steel Tank Institutes testing policies. 25