COMPLIANCE INFO - Laserfiche WebLink

Home Browse Search

Document 1.12 Implementation Date 4/22/19 Revision 0 Revision Date NA Spill Contingency Plan This procedure is applicable to chemical spills. It details the response, cleaning-up, and waste management from the cleanup. Response: Asses the situation. Evacuate the area by notifying colleagues and Gilton employees be verbal response or phone calls in the case of a spill. Refer to the evacuation routes in the Evacuation Procedure. Contact the Emergency Coordinators to discuss the situation once the spill has been contained and release to the environment has been contained. Contact will be made in the case of an emergency by the clean up crew or the Emergency coordinator to the emergency responders listed in section C., Page 1, of the Consolidated Emergency Response Plan posted in the office of the production manager. Additional Agency Notification Numbers will also be posted in section C., Page 1, of the Consolidated Emergency Response Plan posted in the office of the production manager. Spills beyond the capacity of Pacific Spray Dry to clean up will be managed by an outside contractor. Clean Up Procedures: Hazardous Waste Hazardous Waste is generate on site is used oil from gear boxes and the air compressor motor that is under 5 gallons when changed. The likelihood of a release of hazardous waste is low. In the cas of a release utilize the following procedure: 1. Wear glasses, nitrile gloves (located in conex, production area) 2. Obtain oil absorbent pads in the spill kit. 3. Utilize the pads to soak up the immediate spill 4. Utilize oil absorbent"kitty litter"to soak up any remaining residual oil 5. Use berms located in the spill kit to contain spills. 6. Sweep up kitty litter and place in plastic bags and label according to the procedure below. 7. Place oil absorbent pads in a plastic bag and label according to the procedure below. Caustic MG and Grease X 1. Warn personnel in the immediate area 2. Utilize PPE a. Rubber gloves Page 1 of 6