Laserfiche WebLink
SWRCB,January 2002 Page_6_of—8- <br /> 8. FILL RISER CONTAINMENT SUMP TESTING <br /> Facility is Not Equipped With Fill Riser Containment Sumps ❑ <br /> Fill Riser Containment Sumps are Present,but were Not Tested ❑ <br /> Test Method Developed By: ❑ Sump Manufacturer ® Industry Standard ❑ Professional Engineer <br /> ❑ Other(Spec) <br /> Test Method Used: ❑ Pressure ❑Vacuum ® Hydrostatic <br /> ❑ Other(Spec) <br /> Test Equipment Used: INCON SUMP TESTER Equipment Resolution:+/-0.002" <br /> Fill Sump#87(1) Fill Sump#87(2) Fill Sump#91 Fill Sump# <br /> Sump Diameter: 48" 48" 48" <br /> Sump Depth: 65" 64" 64" <br /> Height from Tank Top to Top of N/A NIA N/A <br /> Highest Piping Penetration: <br /> Height from Tank Top to Lowest 20" 22" 19" <br /> Electrical Penetration: <br /> Condition of sump prior to DRY DRY DRY <br /> testing: <br /> Portion of Sump Tested ABOVE ABOVE ABOVE <br /> PENETRATIONS PENETRATIONS PENETRATIONS <br /> Sump Material: FIBERGLASS FIBERGLASS FIBERGLASS <br /> Wait time between applying <br /> pressure/vacuum/water and 10 MIN 10 MIN 10 M I N <br /> starting test: <br /> Test Start Time: 10:01 AM 10:28 AM 10:45 AM <br /> Initial Reading(Rj): 3.9638" 2.5490" 4.2746" <br /> Test End Time: 10:16 AM 10:43 AM 11:00 AM <br /> Final Reading(RF): 3.9638" 2.5491" 4.2744" <br /> Test Duration: 15 MIN 15 MIN 15 MIN <br /> Change in Reading(RF-R,): 0.0000" 0.0001" -0.0002" <br /> Pass/Fail Threshold or Criteria: +/-0.002" +1-0.00211 +/-0.002" +/-0.002" <br /> Test Result: ® Pass ❑ Fail ®Pass ❑ Fail ® Pass ❑ Fail ❑ Pass ❑ Fail <br /> Is there a sensor in the sump? ® Yes ❑ No ®Yes ❑ No ® Yes ❑ No ❑ Yes ❑ No <br /> Does the sensor alarm when <br /> either product or water is ❑Yes [:]No ®NA [:]Yes ❑No ®NA ❑Yes ❑No ®NA ❑Yes ❑No ❑NA <br /> detected? <br /> Was sensor removed for testing? ®Yes ❑No [:INA ®Yes ❑No ❑NA ®Yes ❑No ❑NA ❑Yes ❑No ❑NA <br /> Was sensor properly replaced and <br /> verified functional after testing? ®Yes ❑No [:INA ®Yes []No ❑NA ®Yes ❑No ❑NA ❑Yes []No ❑NA <br /> Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) <br /> ABOVE IS THE LAST OF TWO BACK TO BACK 15 MINUTE TESTS <br />