Laserfiche WebLink
• • Project No. 014-95262 <br /> Page No. 11 <br /> • Ear Protection: Based on anticipated on-site noise measurements, field personnel <br /> may be required by the task safety leader of safety officer to wear hearing <br /> protection devices (ear plugs) during drilling operations. <br /> ' Eye Protection: Each field team member will wear a minimum of impact-resistant <br /> safety glasses with attached side shield. Where splashes of potentially hazardous <br /> liquid or flying particles are likely, chemical safety goggles will be required in <br /> place of safety glasses. <br /> • Foot Protection: Field personnel will wear neoprene rubber boots with steel toes <br /> and shanks. Under non-liquid exposure conditions, leather boots with steel toes <br /> and shanks are permissible. The boots will be taped to the leg of TyvekO suits. <br /> At the discretion of the on-site Safety Task Leader, rubber gloves, Tyvek6 coveralls and neoprene <br /> boots may not be required if soil or water is not obviously contaminated, or if PID measurements of the <br /> split-spoon soil samples are below 500 ppmv. <br /> 5.2 Sample Collection <br /> Personnel who may be exposed to contaminated samples and/or liquid splashes will be required <br /> to wear the following equipment: <br /> • Respiratory Protection: All sampling personnel will be required to have available <br /> for use a properly fit tested half-mask air purifying respirator with organic vapor <br /> cartridges with particulate pre-filters. Respirators will be worn based on criteria <br /> listed in Section 4.0. <br /> • Body Protection: All sampling personnel will wear semi-permeable (white) <br /> Tyvek®coveralls when contact with contaminated soil or liquids is likely to occur. <br /> Company issued safety helmets will be worn when overhead hazards exist. <br /> • Hand Protection: Butyl rubber or nitrile gloves will be worn over disposal latex <br /> or PVC gloves. <br /> • Eye Protection: Impact-resistant safety glasses with attached side shield must be <br /> ' worn during sampling activities. Where splashes may occur, chemical goggles <br /> must be worn. <br /> • Foot Protection: Neoprene rubber boots with steel toes and shanks will be worn. <br /> 5.3 Packaging and Shipment of Samples <br /> • Eye Protection: Impact resistant safety glasses with attached side shield will be <br /> ' worn while packaging samples for shipment. <br /> KRAZAN&ASSOCIATES, INC. <br /> Offices Serving the Western United States <br /> 95262.HSP <br />