Laserfiche WebLink
1 <br /> APPENDIx F: PUMP TESTING PROTOCOLS (continued) <br /> A 2-4 HP submersible pump will be used for the aquifer testing. F' <br /> F rates will be controlled and measured by devices such as orifice <br /> valves. Pumping rates will be measured with in-line totalizers anc <br /> pressure operated flaw-rate gauges. Water levels during pump test!; <br /> will be measured in the pumping well and observation wells using <br /> calibrated pressure transducers and a data logger. During the puma <br /> tests, water levels will be measured beginning at regular interval !i <br /> r <br /> increasing until a five-minute interval has been reached, and at <br /> C <br /> five-minute intervals thereafter. Water levels will be recorded irk <br /> well outside the expected area of influence of the pump test to det <br /> € outside influences on water levels. <br /> 3 <br /> Water generated by the aquifer tests will be stored on site in steer <br /> tanks. <br /> It will then be treated by the existing on-site air ,strippe'. <br /> i <br /> a and discharged into an on-site disposal pond. Should prolonged <br /> aquifer tests .prove to be difficult due to the amount. of contaminati <br /> ? aster produced, slug tests on existing monitoring wells. could be .us <br /> MM <br /> s , <br /> to generate data on the aquifers ' hydraulic parameters. <br /> V ._ .. _� ran .lr:r... - --., - -..... �.. ... ..._ ✓..n.•.. _� . _, <br /> 1� <br />