Laserfiche WebLink
15 February 2016 AdvancedGeo <br /> AGE Project No. 12-2181 Environmental <br /> Page 16 of 23 <br /> 4.2.3. Drainage of Berm Areas (40 CFR 112.8(c)(3)) <br /> Berms are not drained at this Facility; therefore, this section does not apply. <br /> 4.2.4. Corrosion Protection (40 CFR 112.8(c)(4)) <br /> This section is not applicable since there are no underground storage tanks (USTs) at <br /> this Facility. <br /> 4.2.5. Partially Buried and Bunkered Storage Tanks (40 CFR 112.8(c)(5)) <br /> This section is not applicable since there are no partially buried or bunkered storage <br /> tanks at this Facility. <br /> 4.2.6. Inspections and Tests (40 CFR 112.8(c)(6)) <br /> Visual inspections of ASTs by Facility personnel are performed according to the <br /> procedure described in this Plan. Leaks from tank seams, gaskets, rivets, and bolts are <br /> promptly corrected. Records of inspections and tests are signed by the inspector and <br /> kept at the Facility for at least three years, unless otherwise specified. <br /> The scope and schedule of certified inspections and tests performed on the Facility's <br /> ASTs are specified in STI Standard SP-001. The external inspection includes ultrasonic <br /> testing of the shell, as specified in the standard, or if recommended by the certified tank <br /> inspector to assess the integrity of the tank for continued oil storage. <br /> Records of certified tank inspections are kept at the Facility for at least three years, <br /> unless otherwise specified. Shell test comparison records are retained for the life of the <br /> tanks. Table 9 summarizes inspections and tests performed on ASTs. <br /> 4.2.7. Heating Coils (40 CFR 112.8(c)(7)) <br /> This section is not applicable since there are no ASTs equipped with heating coils at <br /> this Facility. <br /> 4.2.8. Overfill Prevention Systems (40 CFR 112.8(c)(8)) <br /> All tanks are equipped with a direct-reading level gauge (roll tape or pop up indicators). <br /> All tanks are equipped with a direct reading display at the loading area for use during <br />