Laserfiche WebLink
` RECEIVED <br /> JAN 0 8 2016 <br /> 9. FILL RISER CONTAINMENT SUMP TESTING <br /> Facility is Not Equipped With Fill Riser Containment Sums �- I <br /> Sumps ❑ - 'I C AL <br /> Fill Riser Containment Sumps are Present, but were Not Tested ❑ °�f-rv=-= CTR4 NOT <br /> Test Method Developed By: ❑Sump Manufacturer ® Industry Standard ❑ Professional Frigineer <br /> ❑Other(.Specify) <br /> Test Method Used: ❑ Pressure ❑Vacuum ® Hydrostatic <br /> ❑Other(Spec4j,) <br /> Test Equipment Used: Incon Sump Tester Equipment Resolution: +i-0.002" <br /> Fill Sump 9:87:= Fill Sump H 91 <br /> -Sump Diameter: 42" 42" <br /> Sump Depth: 64" 64" <br /> Height from Tank Top to Top of 19" 18" <br /> Hi <br /> hestPiping Penetration: <br /> Height from Tank Top to Lowest " <br /> Electrical Penetration: '- <br /> 2 <br /> Condition of sump prior to Good Good <br /> testing: <br /> Portion of Sump Tested 2"above piping, 2"above piping <br /> Sump Material: Fiberglass Fiber <br /> Wait time between applying <br /> pressure/vacuum/water and 30 minutes 311 minutes <br /> starting test: <br /> Test Start Time: 9:18 am 9:18 am <br /> initial Reading(Rj): 3.4627 4.9219 <br /> Test End Time: 9:33 am 9:33 am <br /> Final Reading(RF): 3.4629 4.9221 <br /> Test Duration: 15 min. 15 min. <br /> Change in Reading(RF-R,): 0.0002 0.0002 <br /> Pass/Fail Threshold or Criteria: +/-0,002" +/.0,002" <br /> Test Result: © Pass ❑Fail 0 Pass ❑ Fail <br /> Is there a sensor in the sump? ®Yes ❑No ®Yes ❑No <br /> Does the sensor alarm when <br /> either product or water is ❑ Yes❑ No®NA ❑Yes❑No®NA <br /> detected? <br /> Was sensor removed for testing? O Yes❑No❑NA ®Yes❑No❑NA <br /> Was sensor properly replaced and ®Yes❑No❑ NA ®Yes❑No❑ NA <br /> verified functional after testing? <br /> Comments — (include information on repairs made prior to felting, curd recommended follow-up for.iailed tests) <br /> Sensor functionality was not confirmed.This procedure is not part of the Secondary Containment testing scope of work <br />