COMPLIANCE INFO 2007 - 2009 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page 9 of 10 8. FILL RISER CONTAINMENT SUMP TESTING Facility is Not Equipped With Fill Riser Containment Sumps ❑ Fill Riser Containment Sumps are Present,but were Not Tested ❑ Test Method Developed By: ❑Sump Manufacturer X Industry Standard ❑Professional Engineer ❑Other(Spec) _ Test Method Used: ❑Pressure ❑Vacuum X Hydrostatic ❑Other(Specify) Test Equipment Used:lncon TS STS Equipment Resolution: Fill Sump—R.F.S. Fill Sump—P.F.S. Fill Sump- Fill Sump- Sump Diameter: 42" 42" Sump Depth: 60" 62" Height from Tank Top to Top of 18" 18" Highest Piping Penetration: Height from Tank Top to Lowest 31" 32" Electrical Penetratioih: Condition of sump prior to Clean Clean testing: Portion of Sump Tested Full Full Sump Material: Fiberglass Fiberglass Wait time between applying 15 minutes 15 minutes pressure/vacuum/water and starting test: Test Start Time: 11:21 11:21 Initial Reading(RI): 7.2902" 5.0862" Test End Time: 11:36 11:36 Final Reading(RF): 7.2893" 5.0856" Test Duration: 15 minutes 15 minutes Chane in Reading(RF-RI): .0009" .0006" Pass/Fail Threshold or Criteria: Loss<.002"— ass Loss<.002"— ass Test Result: X Pass ❑Fail X Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fail Is there a sensor in the sump? X Yes ❑No X Yes ❑No ❑Yes ❑No ❑Yes ❑No Does the sensor alarm when either product or water is X Yes ❑No ❑NA X Yes ❑No [INA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA detected? Was sensor removed for testing? X Yes ❑No ❑NA X Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No [INA Was sensor properly replaced and X Yes ❑No ❑NA X Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA verified functional after testing? _Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) Test repeated from 3-22-06 in order to keep all components current.