Laserfiche WebLink
MAY -19-2005 20:01 Service Station Systems 408 938 eeeR P.04 <br />Monitoring System Certification - P, 2 of 3 <br />Site Address: 6425 N. Pacific Ave, @ Central Ct. Date of Testing/Servicing: 4119105 <br />D. Results of Testing/ Servicing <br />Software Version Installed 324.01 <br />t;om lere <br />me Tonowing <br />cnecrcust: <br />v Yes <br />D No* <br />Is the audible alarm operational? <br />0 Yes <br />0 No* <br />Is the visual alarm operational? <br />v Yes <br />a No* <br />Were all sensors visually inspected, functionally tested, and confirmed operational? <br />17 Yes <br />0 No* <br />Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will <br />not interfere with their pro2er operation? <br />M Yes <br />D No* <br />If alarms are relayed to a remote monitoring station, is all communications equipment (e.g. modem) <br />17 NIA <br />operational? <br />M Yes <br />0 No* <br />For pressurized piping systems, does the turbine automatically shut down if the piping secondary containment <br />D N/A <br />monitoring system detects a leak, fails to operate, or is electrically disconnected? If yes: which sensors initiate <br />positive shut -down? (Check all that apply) 2 Sump/Trench Sensors; ❑ Dispenser Containment SCIMOrs <br />Did you confirm positive shut -down due to leaks and sensor failure/disconnection? to Ycs O No <br />0 Yes <br />0 No* <br />For tank systems that utilize the monitoring system as the primary tank overfill warning device (i.e. no <br />A N/A <br />mechanical overfill prevention valve is installed), is the overfill warning alarm visible and audible at the tank <br />fillpoint(s) and operating property? If so, at what percent of tank capacity does the alami trigger? 0 % <br />0 Yes* <br />a No <br />Was any monitoring equipment replaced? If yes, identify specific sensors, probes, or other equipment replaced <br />and list the manufacturer name and model for all replacement parts in Section E, below, <br />a Yes* <br />0 No <br />Was liquid found inside any secondary containment systems designed as dry systems? (Check all that apply) <br />0 Product; o Water. If yes, describe causes in Section E, below. <br />0 Yes <br />0 No* <br />Was monitoring stem set-up reviewed to ensure proper settings? Attach scl-up reports, i a licable. <br />0 Yes <br />0 No* <br />Is all monitorin equipment oerational r manufacturer'sspecifications? <br />* In Section E below, describe how and when these deficiencies were or will be corrected. <br />E. Comments: Prem and Diesel split tank- using the same annular. <br />All dispenser pan sensors are not at the lowest point. <br />Moved all dispenser sensors to the lowest point - 4119/05. <br />Regular turbine/fill sump, had water: removed water - 4/19/05. <br />Premium fill sump: removed water - 4/19/05. <br />Vapor pan had water: removed water - 4/19/05. <br />