Laserfiche WebLink
: Series Pellethane Splitt BOOtS Instillation Instructions <br /> For Replacement Repairs) <br /> STEP 6 Apply a bead of Blue Seal Glue along the gasket rim and install <br /> the boot onto the seal. Install boot with fill tube at the 12:00 <br /> position.Install band clamp to secure the boot to the gasket. 41 <br /> STEP 7 Position the insert into the boot if applicable,but do not tighten <br /> the clamp.This connection must remain loose through the filling <br /> stage to allow air to escape. <br /> i'. <br /> n <br /> STEP 8 Fill the boot with either Parasealant 626, or Bosdk I IOOFS <br /> through the fill tube with the Blueline pneumatic dispensing gun <br /> until the entire cavity is full. This will ensure that the sealant <br /> pushes back through the leak point and stops the leak. <br /> STEP 9 Once the boot is full, tighten clamps and allow sealant to fully <br /> cure. <br /> BLUELINE TECHNOLOGIES 2001 ■ 310-3846 <br />