Laserfiche WebLink
CONTACT I" FOR MORE INFORMATION! <br />atern5555 Skylane Blvd., Si A / Santa Rosa, CA 95403 <br />rglass Ph: (800) 688-3375 / Fx: (800) 700-1188 <br />www.westemfg.com <br />DIRECT CONNECTION FOR FRP TANKS: <br />FRP sumps may be attached directly to FRP or FRP clad tanks without collars. <br />Sump Riser Tubes are cut to tank diameter and are direct bonded using bond <br />kit (Part # TA8009 for 42" sumps, TA8010 for 48" sumps). See bonding <br />instructions. For steel tank direct attachment installation information, please <br />call WFG. <br />FRP MANWAYS OR HDPE POLYCON: <br />Please call WFG for double wall instructions. Sumps that are to be attached <br />to manways require a bottom and may be ordered pre -drilled for the <br />manway cover bolt pattern and/or cut to manway size. After removing the <br />manway lid, use it as a template for cutting and drilling the sump bottom if <br />necessary. Caulk manway riser, set sump into position, caulk around holes set <br />lid inside sump and bolt together. This "sandwiches" the sump between the <br />riser and lid assembly of the tank. Use a recognized material, second, <br />tank/man-way gasket. We suggest the gasket kit from your tank supplier. <br />SUMP BOTTOM z ` ' ' ' a -1--? LID <br />GASKET' GASKET <br />MANWA <br />TANK <br />For Bung Fitting Installation for PolyCon Sumps, Please See Drawing Section of <br />Binder. <br />SUMP REDUCERS: <br />To prevent leakage and to insure unit integrity, all FRP sump reducers must be <br />slip fitted over the sump body or tube, bonded and sealed. See Bonding <br />Instructions. T. C. or Friction lids simply slip over reducer top. "B" type, water <br />resistant, lid systems utilize pull down "dog" or tie down to hold the lid securely <br />against the sealing gasket on the reducer rim. "A" type lid systems are <br />gasketed and bolted watertight with wing nuts, lock and flat washers. <br />Page 30 of 38 <br />