Laserfiche WebLink
Smith Environmental SITE SAFETY PLAN <br /> Physical Hazards <br /> Task(s) Hazard Mitigation Measure <br /> 1 Heavy Equipment(Noise& Physical All heavy equipment used on this project will <br /> contact) be in good working order and operated in <br /> accordance with recognized industry standards <br /> and Cal-OSHA Title 8, Subchapter 4, <br /> Construction Safety Orders In addition, an <br /> exclusion zone applies to all personnel The <br /> exclusion zone will be 20 feet to the front and <br /> either side of the operating drill rig Personnel <br /> will not be allowed under booms or augers at <br /> any time <br /> All equipment operators and ground crews <br /> working In close proximity of heavy equipment <br /> will be supplied with ear protection <br /> Dust The dust hazard will be mitigated by not <br /> allowing ground crew to be located down wind <br /> of drilling and excavation activity In addition, <br /> water will be applied to control the dust if <br /> visible levels of dust are generated <br /> Fire and Explosion Hazards <br /> List Flammable or Combustible materials on-site. Keep sources of ignition away from these <br /> materials <br /> Flammable(Flash Point<100"F) Corn bustible(Flash Point<200°F) <br /> Gasoline <br /> Type and Location of Fire Extinguishers (Show on map for large projects) <br /> Dry chemical fire extinguishers. Class ASB, and C. are stored in all Smith.Environmental vehicles <br /> PACES <br />