ARCHIVED REPORTS XR0010185 - Laserfiche WebLink

Home Browse Search

Health and Safe!y Procedures Implementation of the Health and Safety procedures include establishing work zones, personnel and equipment decontamination areas and ensuring that all on-site personnel have received proper training in accordance with 29 CFR 1910 and 29 CFR 1926 Specific procedures, methods, engineering controls, and personnel protective equipment will be required for all on-site personnel throughout construction activities UtiIity Survey Due to the lack of availability of utility as-built drawings for the facility, the contractor will perform a utility survey using a subsurface utility locating firm Excavation activities shall not commence until the utility survey has been completed Excavation Equipment Mobilization To perform the UST and soil excavation, a small track mounted excavator will be transported to the site via 18-wheel, long-bed trailer Ten wheeler type transport vehicles will also be utilized to remove and haul impacted soil to a certified disposal facility UST, Soil and Ground Water Excavation Activities General controls that will be implemented during excavation include the placement of caution tape and barricades along the excavation perimeters to ensure the safety of on-site personnel and visitors UST Removal and Disposal Upon completion of the utility survey, the contractor will sawcut and remove surface pavements at each UST site as required to remove the tanks The 8 inch thick concrete transformer pad located on the southeast corner of the warehouse will also be removed The contractor will excavate soils above the tanks as required to expose the tops of each tank and cut open the tank tops to expose and facilitate removal of tank contents Under the supervision of SJC, the contractor will remove and dispose of tank contents and triple rinse each tank to remove any residual sand, fuel, and vapors Soils adjacent to the tank walls will then be excavated to facilitate tank removal 3-2