SR0079734 - Laserfiche WebLink

Home Browse Search

FLYQrT a xylem brand ADDENDUM A Pump Storage PERIODS OF EXTENDED STORAGE FOR FLYGT PUMPS GREATER THAN TWELVE (12) MONTHS: Before installation the operator must, at a minimum provide documentation that the following procedures have been accomplished: 1) Inspect the unit for corrosion around the pump and under the Junction Chamber Cap for indications of condensation. 2) Reinstall the Impeller in accordance with Flygt procedures 3) If used, fill with new coolant having a mix of 30% mono-propylene glycol and 70% water. 4) Manually rotate the Impeller after introducing new coolant 5) Perform all static electrical checks of the Drive and Motor 6) Ensure that all bolts and fasteners on the pump are tight and secure 7) Install pump and run for fifteen (15) minutes. 8) Remove pump after fifteen (15) minute run and check oil in Oil Housing. If discolored or contains water, change Shaft Seals as described in Flygt service manual. 9) Inspect Stator for moisture as indicated in manual. 10) Before returning the pump for operation, check that the direction of rotation is correct. The ability to keep Flygt product clean, out of the elements and free of rust and/or corrosion should maintain the integrity of the Flygt pump components for extended periods of time and reduce the deterioration probability to a point where it would no longer be a consideration. In conjunction with the steps outlined above there are three O-Rings that should be replaced (if equipped on the unit) after prolonged periods of storage: •The two (2) inspection 0-Rings and the 0-Rings located in the Junction Cover. By introducing proper maintenance, cleanliness and some common sense in the "equation"... the integrity of a Flygt pump will be long lasting. Regarding warranty... the standard is... Start-up must occur within one (1) year from ship date. Quality/Warranty s Y�_-