Laserfiche WebLink
1.40, -.do, <br /> Lodi Unified School District <br /> 820 S. Cluff Avenue,Lodi, California August 1, 1994 <br /> Environmental Assessment Report page. 2 <br /> 3.1 Drilling <br /> Permits were obtained for the borings before drilling began. The soil borings were <br /> accomplished using a mobile mounted drilling rig employing a hollow stem flight <br /> auger no less than 3 1/4-inch i.d. and 8 7/8 o.d. <br /> .y <br /> All drilling equipment was thoroughly steam cleaned before drilling began to <br /> prevent the introduction of contamination from off site and to prevent cross <br /> contamination. <br /> The boring was logged by a geologist (Appendix B)under the direct supervision of <br /> a registered professional using the Unified Soil Classification System. The color, <br /> texture, moisture, plasticity (if applicable), consistency of the earth materials, <br /> pertinent soil or bedrock characteristics and any evidence of contamination was <br /> noted. The boring was drilled in such a manner as to prevent cross contamination <br /> between strata. <br /> The cuttings from the drilling operation were containerized on site during drilling <br /> for proper disposition. The proper method of disposal is dependent upon results of <br /> laboratory analysis. This disposal is the responsibility of the client. <br /> 3.2 Soil Sampling <br /> All soil sampling equipment was thoroughly cleaned before and between sampling <br /> to prevent cross contamination. Relatively undisturbed soil samples were taken at <br /> intervals of not more than five feet (5') in order to evaluate the subsurface <br /> materials. <br /> The soil samples were taken using a California Modified Split Spoon sampler with <br /> brass liners. The laboratory samples were immediately sealed in their liners using <br /> aluminum foil lined plastic caps. The remaining samples were removed from the <br /> liner and used as an aide to the on-site geologist in logging the material at that <br /> depth. Soil samples for laboratory analysis were properly labeled with date <br /> collected, project number, sample coordinator, and sample identification. The <br /> samples were refrigerated immediately for delivery to the laboratory and were not <br /> opened by anyone other than laboratory personnel. Chain of Custody records were <br /> maintained at all times (Appendix A). <br /> Soil samples collected for laboratory analysis were analyzed for hydraulic oil by the <br /> California State Certified Laboratory of GeoAnalytical, Inc. <br />