Laserfiche WebLink
TrYU 1 E <br /> ATTACFMIT <br /> ARM <br /> L"IXT WITH HEX BITS <br /> LEEATED OF THE LAS MORE <br /> STEEL LAMER <br /> Lb-SILT ASSSMY (4 ReRMIM PER CASE LWT) <br /> TLP CAGE LPW <br /> M11 CAGE UNIT <br /> VrM R ALM p® <br /> Wiffil <br /> 7 FT MIN XLM <br /> 8 FT, MAXI!@) <br /> Figure 5 5 <br /> 56 FRP LADDERS(up to 300" height) <br /> 561 FRP ladders are designed in accordance with OSHA 1910 27 and are to be mounted next to the <br /> tank on a concrete pad at the same elevation as the bottom of the tank The concrete pad area that <br /> the ladder mounts to must be of sufficient size as to comply with OSHA standards regarding proper <br /> access to and from the ladder This should be determined by the construction site engineer Based on <br /> the specific application The pad must be of sufficient size to allow proper attachment of 518"anchor <br /> bolts(check with anchor bolt manufacture for embedment and edge distance required) The ladder <br /> mounting system is designed to allow for tank expansion and contraction due to temperature and <br /> . loading changes Using the assembly drawing and table shown in Figure 5 6, verify that all parts are <br /> present and assemble accordingly <br /> 23 <br />