ARCHIVED REPORTS XR0008515 - Laserfiche WebLink

Home Browse Search

Geofagualrlecfi�cus Inc Page 5 Valentine(Castle Motors) Vertical Def WP August 23, 2000 ' between three readings) indicating that formation water representative of aquifer conditions is entering the well These water quality parameters are measured at intervals of each well volume purged A stainless steel or disposable plastic bailer will be used to collect each sample Care will be taken to minimize sample agitation from the initial filling of the bailer to the transfer of the sample to the VOA vial and glass amber liter bottles Once the sample container is filled and capped, the bottle will be inverted, tapped, and checked for headspace bubbles The sample container is identified and labeled with a unique designation, inserted into foam holders and placed in an ice chest cooled to 4°C for transport to the laboratory All non-disposable sampling equipment is decontaminated using a steam cleaner before and between uses The effectiveness of the decontamination procedure is ensured by using the following quality control measures • Disposable gloves will be used by the technician to collect all samples and will be changed with each sampling event ' • A bailer blank for each well will be collected prior to sampling by filling the decontaminated stainless steel bailer with water (provided by the laboratory) and then filling a VOA vial (provided by the laboratory) using the same procedures for actual sample collection Bailer blanks for each sample, along with a field blank (prepared from water provided by the laboratory poured into a VOA vial on site), will accompany the samples to the laboratory and serve as checks against cross contamination A chain of custody document, listing all samples collected, accompanies the samples from ' field to laboratory, thereby providing a means to track their movement and ensure their integrity All water purged from each monitoring well and not used as a sample, will be placed in a 55 ' gallon DOT approved container, properly labeled and stored on site 2.5 Groundwater Sample Analyses ' One groundwater sample from each well will be submitted to CLS Laboratories (State Certified Laboratory 91233) and analyzed for • Benzene, toluene, ethylbenzene and xylene (BTEX) by EPA method 8020 • Gasoline range petroleum hydrocarbons (TPH-G) by EPA method 8015(m) • Fuel oxygenates (MTBE, TBA, DIPS, ETBE and TAME) by EPA method 8260 • 1,2 DCA, EDB, methanol and ethanol by EPA method 8260 IThe detection limits for these compounds are listed below A Chain of Custody will be completed for all samples collected and tracked to ensure sample integrity ' Detection Limits BTEX Ethers -U 1,2--DCA & EDB MethanolEthano Water dig 1 • 1 1