Laserfiche WebLink
RECEIVLD <br />Overfill Alarm/Ack Switch Installation Guide 0 CT 2 7 2016 Mounting Instructions <br />1/2" <br />condu <br />connec <br />(3E <br />ENVIRONMENTAL HEALTH <br />DEPARTMENT <br />3" (76.2 mm) <br />—. F- 1" (25.4 mm) <br />consoles�acksw.eps <br />Mounting Instructions <br />OVERFILL ALARM <br />0.313" (8 mm) dia. <br />4 holes <br />Hinge <br />side <br />2" (50.8 mm) <br />ACKNOWLEDGE <br />O <br />I - 2" (50.8 mm <br />4.3" (109.5 mm) <br />TEST button <br />(on side) <br />6.75" <br />(171.5 mm) <br />Figure 2. Acknowledgement Switch mounting dimensions <br />1. Select a mounting location where the Overfill Alarm can be seen and heard clearly from the area where the fuel tanks <br />are filled. In addition, consider the ease of routing interconnection conduit. <br />2. Locate and mark mounting holes using the hole pattem in Figure 1. <br />3. Mount the Overfill Alarm using the four mounting tabs on the housing. <br />ACKNOWLEDGEMENT SWITCH <br />1. Select a mounting location where the Acknowledgement Switch can be easily activated by the tank truck driver. In <br />addition, consider the ease of routing interconnection conduit. <br />2. Locate and mark mounting holes using the hole pattern in Figure 2. <br />3. Mount the Acknowledgement Switch using the four mounting tabs on the housing. <br />4. Install conduit between the Acknowledgement Switch, Overfill Alarm, and TLS Console. <br />4 <br />