Laserfiche WebLink
Overfill Alarm/Ack Switch Installation Guide Testing the Overfill Alarm with the Console <br />2. Press the RESET button on the front of the switch. The alarm horn and red flashing light should shut off. The <br />ACKNOWLEDGED light on the front of the switch should be On. (Pressing the RESET button shuts Off the alarms <br />but does not clear the alarm. The cause of the alarm must be removed before the ACKNOWLEDGED light will turn <br />Off.) <br />3. Turn Off power to the console and to the Overfill Alarm. Remove the jumper between the console's Output Relay <br />connections. <br />4. Reapply power to the console and to the Overfill Alarm. The ACKNOWLEDGED light should now be Off because <br />J� the cause of the alarm (in this case, the shorting jumper) has been removed. <br />L F x <br />OCT 2 7 2016 <br />ENVIRONMENTAL HEALTH <br />DEPARTMENT <br />