Laserfiche WebLink
• 12/30/92 <br /> ° Restart unit, Drain water from condensate traps Adjust unit <br /> and sample Collect bag samples of influent, effluent for WEGE <br /> laboratory System set at 0% air dilute <br /> 01/06/9 <br /> Unit self shutdown 10 : 00 Attempt to start 19 00 , could not <br /> restart <br /> 01/17/93 <br /> Unit restarted by technician from Burners and Controls <br /> 01/19/92 <br /> Unit running on arrival Drain water from condensate traps <br /> Adjust unit and sample . Collect bag samples of influent, <br /> effluent for WEGE laboratory System set at 0 air dilute . <br /> 02/08/92 <br /> Unit running on arrival Adjust unit and sample Collect bag <br /> samples of influent, effluent, MW1, M2/3 , MW10 and EX for WEGE <br /> laboratory System set at 0% air dilute <br /> 02/x8/92 <br /> Unit running on arrival Adjust unit and sample Collect bag <br /> samples of influent , effluent for WEGE laboratory. System set <br /> at 0°a air dilute <br /> The VOC emissions have never exceeded the 52 lb/day emission limit <br /> for the site No evidence of Tetrachloroethylene (PCE) was found <br /> during examination of the chomatograms of the samples taken to the <br /> WEGE laboratory. <br /> VAPOR SAMPLING <br /> COLLECTING LABORATORY SAMPLES <br /> Influent Sample <br /> The influent sample is obtained from a sample port located after the <br /> system vacuum pump before the REMOX Unit Sterile poly tubing is <br /> then used to attach a 1 liter tedlar bag, fitted with a special <br /> septum "valve" and tubing bib, to the sample port The sample port <br /> is on the pressure side of the pump and therefore the bag will fill <br /> without need of a pump Once the tedlar bag is filled, its valve is <br /> closed and locked, the appropriate label is placed on the tedlar <br /> bag <br /> page 2 of R603 , 03/01/93 <br />