Laserfiche WebLink
Ys ,, <br /> Chandler Martin November 18, •1994 <br /> SA=94-47 _ Page 2 <br /> Specifically, the District suggests that the following Mitigation Measures be included <br /> as-part of project approval: <br /> • All material excavated, graded should be sufficiently watered or otherwise <br /> - treated to prevent excessive amounts of dust entrainment. <br /> j • All clearing, grading, earth moving, or excavation activities should cease when <br /> ! wind speeds are equal to or greater than 20 mph. <br /> • On-site vehicle speed should be limited to 15 mph. <br /> Ozone Precursors-Ozone precursor.emissions should be controlled by the following <br /> methods: <br /> • <br /> All internal combustion engine driven equipment should be properly maintained <br /> and tuned according to manufacturers specifications. <br /> • Idling of all internal combustion equipment shall be limited to ten minutes at any <br /> given time. <br /> Use of building materials that do not require the use of paints/solvents. <br /> The applicant should be aware that any equipment (emergency generators and pumps, <br /> etc.) that have the potential to emit air pollutants may be subject to permitting by the <br /> District. If there are any questions regarding operating Permits the applicant should <br /> contact the Permit Services section of this office. <br /> Thank you for the opportunity to comment on this project. If you have any questions <br /> or.require further information, please call me at 545-7000. <br /> Sincerely,, <br /> David S. Sta aro .. <br /> Environmental Planner <br /> Northern Region g APCD RAF#N940457 <br />