SU0003216 - Laserfiche WebLink

Home Browse Search

f M CONDITIONS OF APPROVAL JESSE & MARILYN BRAZEAL SA-91-32 Unless otherwise specified, all the conditions of Approval shall be fulfilled prior to the issuance of any building permits and prior to the initiation of the use. This approval will expire eighteen (18) months from the effective date of the approval unless (1) all Conditions of Approval have been complied with, (2) all necessary building permits have been secured and remain in force, and (3) all necessary permits from other agencies have been secured and remain in force. Conditions of Approyal: 1. This approval is for a building to contain the two following uses: a welding/construction company and a gear manufacturing company. 2. There shall be no outside storage of equipment or material or r any outside operations associated with the approved uses. 3 . The number of parking spaces shown on the Site Plan is adequate for.-the number of employees and amount of development proposed. Each parking space shall not be less than nine (9) feet in width and twenty (20) feet in length. Aisles shall be a minimum of twenty-four (24) feet wide. Additional employees or development may require an increased number of parking spaces. Parking calculations and details shall be shown on the Improvement Plan (Section 9-3702 of the Planning Title) . 4 . Three (3) off-street truck loading spaces shall be provided on the site and shown on the Improvement Plan. Each space shall be a minimum of twenty-five (25) feet in length and fifteen (15) feet in width, and shall have a minimum height clearance + of fourteen (14) feet. On--site driveways and maneuvering �. areas may be used in lieu of one of the loading spaces as long as maneuvering areas for delivery vehicles are provided. 5. All parking spaces, driveway, and maneuvering areas shall be a paved and permanently maintained with asphalt or cement. Bumper guards shall be provided where necessary to protect adjacent structures or properties. 6. All parking stalls and driveway directions shall be delineated. 7. A trash enclosure shall be provided and designated on the I Improvement Plan. The enclosure shall be designed to accommodate all trash receptacles and constructed on three sides with a solid wall and gated on the fourth side.