Laserfiche WebLink
influent as outlined at the time of purchase. The introduction of contaminated products not specified at <br /> the time of purchase may result in decreased separator efficiency. It is especially important that <br /> detergents are not allowed into the separator. Detergent emulsified oils must be chemically pretreated <br /> before entering the separator. Centrifugal or high speed pumps should not be used on the influent as they <br /> will create mechanically emulsified oils of less than 20 microns in size that will not readily separate. <br /> Questions regarding deviations from standard operation or pumped flow to a McTighe Industries Oil- <br /> Water Separator should be directed to: <br /> McTighe Industries: A Division of Billion International Group,Inc. <br /> 3405 S. Westport Avenue <br /> Sioux Falls, SD, 57106 <br /> Phone: 888-776-0581 - Fax: 605-362-3494 <br /> ACCESS <br /> Access to all intemals of the separator, dependent on design requirements, is through two(2) 3" <br /> clean-out ports. In the event that major maintenance is required,the entire gasketed steel cover of the <br /> separator can be unbolted and removed. A separate gasketed steel cover is provided for direct access to <br /> the Petro PakTm and/or the steel channels for the Pak. <br /> DRAWING DESCRIPTION <br /> McTighe provides professional CAD blueprint drawings for every oil-water separator order we <br /> process. The CAD drawings include information on all accessories that are provided with the separator <br /> at the time of purchase. <br /> The Catalog cut drawings for our CO(Drawing No. CO-1-1 dated April 12, 2002) and PCO <br /> (Drawing No. PCO-1-1 dated April 12, 2002) model oil-water separators provide details on our standard <br /> oil-water separator configurations. The flowrate, oil storage volume and dimensions can be modified to <br /> match site and performance conditions. <br /> See Special Configurations (this section), Skid Mounting(this section), Oil Removal Options <br /> (Section 4)and Accessory Information(Section 6)of this catalog for additional details on separator <br /> layouts and controls. McTighe can provide tailored CAD drawings and disks to specifying engineers <br /> and architects. <br /> = Normal Operating Conditions. <br /> The catalog flow ratings are based upon gravity-fed influents containing oils of 0.90 or lighter <br /> specific gravity, up to 20%(200,000 ppm)oil content in the water and temperatures of 40° F to 140* F. <br /> Contact McTighe Industries for applications where the influent requirements exceed the stated limits. <br /> Section 3.A—Rev 6/02—3/3 <br />