SU0005292 - Laserfiche WebLink

Home Browse Search

lk € Ms. Hayes August 22, 2005 h PA-0500509: Page3 • If transit service is available to the project site, improvements should be made to encourage its use. If transit service is not currently available, but is planned for the area in the future, easements should be reserved to provide for future improvements such as bus turnouts and shade structures. Appropriations made to facilitate public or mass transit will help mitigate trips generated by the project. Direct pedestrian access to the main entrance of the project from existing or potential public transit stops and provide appropriately designed sidewalks. • Sidewalks and bikeways should be installed throughout as much of the project as possible and should be connected to any nearby existing and planned open space areas, parks, schools, residential areas, commercial areas, etc., to encourage walking and bicycling. Connections to nearby public uses and commercial areas should be made as direct as possible to promote walking for some trips. Pedestrian and bike-oriented design reduces motor vehicle usage and their effects on air quality. Sidewalks and bikeways should be designed to separate pedestrian and bicycle pathways from . vehicle paths. Sidewalks and bikeways should be designed to be accommodating and appropriately sized.for-anticipated future pedestrian and bicycle use. Such pathways should be easy to navigate, designed to facilitate pedestrian movement through the project, and create a safe environment for all potential users (pedestrian, bicycle and disabled) from obstacles and automobiles. Sidewalks should be designed for high visibility (brightly painted, different color of concrete, etc.) when crossing parking lots, streets and similar vehicle paths. Clearly marked and highly visible pedestrian accesses create a safer environment for both pedestrians and vehicles. Pathways through the project should be built in anticipation of future growth/development. • As many energy conserving and emission reducing features as possible should be included in the project. Energy conservation measures include both energy conservation through design and operational energy conservation. Examples include (but are not limited to): - Increased energy efficiency(above California Title 24 Requirements) See http://www.energy.ca.gov/title24/. - Energy efficient widows (double pane and/or Low-E) - Use Low and No-VOC coatings and paints. See South Coast's site for No-VOC Coatings at http://www.agmd.gov/business/brochures/ze_rovoc.htmi - High-albedo (reflecting) roofing material. See http://eetd.Ibl.gov/coolroof/ - Cool Paving. - Radiant heat barrier. - Energy efficient lighting, appliances, heating and cooling systems. See http://www.energystar.goy/ - Install solar water-heating system(s) - Programmable thermostat(s)for all heating and cooling systems Awnings or other shading mechanism for windows - Porch, patio and walkway overhangs - Ceiling fans, whole house fans - Utilize passive solar cooling and heating designs. -(e.g. natural convection,thermal flywheels) See http://www.eere.energy.gov/Rh/solar passive.html - Utilize daylighting (natural lighting) systems.such as skylights, light shelves, interior transom windows etc. See htto://www.advancedbuildings.org - Electrical outlets around the exterior of the unit(s) to encourage use of electric landscape maintenance equipment - Pre-wire the unit(s) with high speed modem connections/DSL and extra phone lines - Natural gas fireplaces (instead of wood-burning fireplaces or heaters) - Natural gas lines (if available to this area) and electrical outlets in backyard or patio areas to encourage the use of gas and/or electric barbecues - Low or non-polluting incentives items should be provided with each residential unit (such items could include electric lawn mowers, reel mowers, leaf vacuums, gas or electric barbecues, etc.)