Laserfiche WebLink
It is the responsibility of the Project Manager and the Health and Safety Manager to review the available site <br /> information to determine,to what degree the Health and Safety Plan will be implemented. Each site will be <br /> handled on a case-by-case basis. <br /> 2.0 SAFETY IMPLEMENTATION <br /> The provisions of the M.J.Kloberdanz&Associates Health and Safety Plan are mandatory for all personnel associated <br /> with the site project and operations. <br /> A complete background review and site visitation will be conducted in order to deter-mine whether specific <br /> amendments are to be made to the Health and Safety Plan based on specific characteristics which may exist on the job <br /> site. Any suspected hazards associated with the on-site operation which exposure to, via inhalation or skin absorption, <br /> to such as suspected carcinogens or human sterilants,will be documented and specific guidance will be developed and <br /> added to this Health and Safety Plan as Appendices. <br /> A defined project site layout is paramount to the safe completion of all remedial site investigations. The project site <br /> layout has built-in safety features.The site is divided into three zones.The following list defines the required personnel <br /> protective equipment. <br /> 2.1 Personnel Protective Equipment(PPE) <br /> Personnel who will be working in or around the exclusion zone of the job site will use the following <br /> protective equipment and measures as warrant by the Project Manager: <br /> Coveralls as an undergarment <br /> - Saranex outer garment <br /> - Sample gloves(inner) <br /> PVC,Nitrile or Neoprene outer gloves <br /> Hard hat <br /> Steel toe boots <br /> - Robars or Tingley boots cede, <br /> Full face-piece respirator with R53HE cartridges(a combination of organic vapor,acid gas,peso <br /> radionuclide,high efficiency filter). Note that cartridges should be changed daily. <br /> - All joints to be taped <br /> - Self-contained air will be utilized if project dictates <br /> More stringent protective equipment requirements will be implemented if necessary. This determination will <br /> be made by the project supervisor after review of the materials to be handled,the ambient monitoring data, <br /> consultation with on-site technical personnel, the Safety Officer, and the proper management personnel. <br /> Upgrades in PPE,if necessary,will be implemented. <br /> 2.2 General Safety <br /> The on-site Safety Officer will be responsible for the following daily safety implementations: <br /> 2.3 Daily Safety Meetings <br /> Each day,prior to commencing work, a safety meeting shall be held to discuss safety considerations for the <br /> day's work to be done.A safety topic shall be addressed each day from the following list: <br /> - Site Safety Plan(first day and once a week thereafter) <br /> - Fire Fighting Techniques <br /> - Defensive Driving <br /> - Decontamination <br /> - Levels of Protection <br /> - Heat Stress <br /> - Emergency Equipment on Site <br /> Confined Space Entry Procedure- Respirator Maintenance <br /> Self-contained Breathing Apparatus Training(if necessary) <br /> 11 <br />