SU0006921 - Laserfiche WebLink

Home Browse Search

PaMWM Almond ProoeWng Company N-1082706, N-1337-1.8,2-7,6-1. 7-0,$-o • This engine shall be operated and maintained In proper operadng cox*on per the manufacturers requirements as specified on the inspection and Monitoring(1&M)plan submitted to the Distinct. [District Rule 4702] • The permittee she11 monitor and record the stack concentration of Now CO, and 02 at least once.every calendar quarter(in which a source test is not perft� using a Portable emksslon monitor that meets District speciflcetfons. Monitoring shall be POnbrmed not less than once evhary month for 12 months if 2 consecutive deviations are observed during quarterly monitoring. Monitoring shall not be required if the engine is not in operation, i,e. the engine need not be started solely to.perlbrm monitoring. Monitoring shall be pedbnned within 5 days ofrestarf V the engine unless monitoring has been performed within the last month ff on a monthly monitoring schedule, or within the last quarter if on a quarterly monitodng schedule. Records must be maintained of the dates of non-operation to validate extended monitoring MMuencies. [District Rule 4702] • if either the NOx or CO concentrations corrected to 15% 02, as measured by the portable analyzer, exceed the allowable emission concentration, the permittee shall return the emissions to within the acceptable range as soon as possible, but no longer than 8 hours after detection. If the portable analyzer readings continue to exceed the allowable emissions concentration after 8 hours, the permittee shall notify the District within the following 1 hour, and conduct a certified source test within 60 days of the first exceedance. In lieu of conducting a source test, the pennittee may stipulate a violation has occurred, subject to enforcement action. The permittee must then correct the violation, show compliance has been re-established, and resume monitoring procedures. If the deviations are the result of a qualifying breakdown condition pursuant to Rule 1100, the permittee may fully comply with Rule 1100 in lieu of the performing the notification and testing required by this condition. [District Rule 4702] • All altemote monitoring parameter emission readings shall be taken with the unit operating either at conditions representative of normal operations or condidons specified in the permit-to-operate. The analyzer shaft be calibrated, maintained, and operated in accordance with the manufacturer`s specifications and recommendations or a protocol approved by the APCO. Emission readings taken shall be averaged over a 15 consecutive-minute period by either taking a cumulative 15 consecutive- minute sample reading or by taking at least five readings, evenly spaced out over the 15 consecutive-minute period. [District Rule 4 702 • The permittee shall update the 1&M plan for this engine prior to any planned change in operation. The permittee must notify the District no later than seven days after changing the I&M plan and must submit an updated 1&M plan to the APCO for approval no later Man 14 days after the change. The date and time of the change to the l&M plan shall be ` recorded in the engine's operahng log. For modificadons, the revised l&M pian shah be submitted to and approved by the APCO prior to Issuance of the Permit to Operate, The Permittee may request a change to the 1&M plan at any time. IDkstrict Rule 4702] • The permittee shall maintain records of: (1) the date and time of NOx, CO, and 02 measurements, (2) the 02 concentration in percent and the measured NOx and CO concentrations corrected to 15% 02, (3) make and model of exhaust gas analyzer, (4) exhaust gas analyzer calibration records, and(5),o description of any corrective action taken to maintain the emissions within the acceptable range, Pst*t Rule 4702] 28 e