SU0012121 - Laserfiche WebLink

Home Browse Search

e. MAINTENANCE OF FACILITIES: All freestanding structures,antennas,and supporting equipment associated with wireless telecommunication shall be maintained in good condition by the provider of the telecommunication facility and, whenever necessary, repaired or replaced. (Development Title Section 9-1065.7) f. TOWER LIGHTS AND PAINTING: For safety purposes,the communications tower shall be lighted and painted according to the following requirements: (1) Red lights shall be placed at or near the top of the tower and at the vertical mid-point of the tower. All lights shall operate twenty-four hours a day. (2) The tower lights and painting shall conform to all lighting and painting standards required by the Federal Aviation Administration. g. REMOVAL OF FACILITIES: Freestanding structures, antennas, and supporting equipment associated with wireless telecommunication shall be removed by the provider of such facilities and the site restored to its pre-construction state if said facilities have not been operational or used for a period of six (6) consecutive months. Removal and site restoration shall be completed within ninety (90) days of the end of said six (6) month period. (Development Title Section 9-1065.8) h. BUILDING CODE REQUIREMENTS: The following California Building Code (CBC) and San Joaquin County Ordinance requirements will be applicable to the proposed project. The following conditions shall be addressed prior to submittal of a building permit application to the Building Inspection Division: (1) A building permit for each separate structure or building is required. Submit plans, Specifications and supporting calculations,prepared by a Registered Design Professional (architect or engineer) for each structure or building, showing compliance with the 2016 California Building, Existing Building, Mechanical, Plumbing, Electrical, Energy and Fire Codes as may be applicable. Plans for the different buildings or structures may be combined into a single set of construction documents. (2) A grading permit will be required for this project. Submit plans and grading calculations, including a statement of the estimated quantities of excavation and fill, prepared by a Registered Design Professional. The grading plan shall show the existing grade and finished grade in contour intervals of sufficient clarity to indicate the nature and extent of the work and show in detail that it complies with the requirements of the code. The plans shall show the existing grade on adjoining properties in sufficient detail to identify how grade changes will conform to the requirements of the code. (3) The required plans must be complete at the time of submittal for a building permit. Plans must address building design and construction, fire and life safety requirements, accessibility and show compliance with the current California codes and San Joaquin County ordinances.A complete set of plans must include fire sprinkler plans,truss design