SU0006490 - Laserfiche WebLink

Home Browse Search

Mr. Griffin Page 2 of 3 PA-0700108(MS) `�► Applicable District Rules Based on the information provided, the proposed project will be subject to the District rules identified below. These rules have been adopted by the District to reduce emissions throughout the San Joaquin Valley, and are required. This project may be subject to additional District Rules not enumerated below. To identify additional rules or regulations that apply to this project, or for further information, the applicant is strongly encouraged to contact the District's Small Business Assistance Office at (209) 557- 6446. Current District rules can be found at www.valleyair.org/rules/1 ruleslist.htm. Regulation Vlll (Fugitive PM10 Prohibitions) Rules 8011-8081 are designed to reduce PM10 emissions (predominantly dust/dirt) generated by human activity, including construction and demolition activities, road construction, bulk materials storage, paved and unpaved roads, carryout and track out, landfill operations, etc. The District's compliance assistance bulletin for construction sites can be found at www.valleyair.org/busind/comply/PM10/Req VIII CAB.pdf. If a non-residential project is 5.0 or more acres in area, a Dust Control Plan must be submitted as specified in Section 6.3.1 of Rule 8021. Construction activities shall not commence until the District has approved the Dust Control Plan. A template of the District's Dust Control Plan is available at www.valleyair.org/busind/comply/PM10/ forms/DCP-Form.doc Rule 4102 (Nuisance) This rule applies to any source operation that emits or may emit air contaminants or other materials. In the event that the project or construction of the project creates a public nuisance, it could be in violation and be subject to District enforcement action. Rule 4601 (Architectural Coatings) This rule limits volatile organic compounds from architectural coatings by specifying architectural coatings storage, clean up and labeling requirements and applies to any person who supplies, sells, offers for sale, applies, or solicits the application of any architectural coating. Rule 4641 (Cutback, Slow Cure, and Emulsified Asphalt, Paving and Maintenance Operations) If asphalt paving will be used, then paving operations of this project will be subject to Rule 4641 . This rule applies to the manufacture and use of cutback asphalt, slow cure asphalt and emulsified asphalt for paving and maintenance operations. Rule 9510 (Indirect Source Review) This rule was adopted to reduce the impacts of growth in emissions from all new development in the San Joaquin Valley. Rule 9510 requires applicants subject to the rule to provide information that enables the District to quantify construction, area and operational PM10 and NOx emissions, and potentially mitigate a portion of those emissions. Rule 9510 requires construction exhaust emissions to be reduced by 20 percent for NOx and 45 percent for PM10 and operational emissions to be reduced by 33.3% for NOx and 50% for PM10 when compared to the statewide fleet average. An application must be filed with the District no later than concurrent with application with a local agency for the final discretionary approval. For more information and instruction, please contact the District's ISR staff by phone at (559) 230-6000 or by email at ISR(a)valleyair.org.