SU0010840 - Laserfiche WebLink

Home Browse Search

k. BUILDING CODE REQUIREMENTS: The following California Building Code (CBC) and San Joaquin County Ordinance requirements will be applicable to the proposed project. The following conditions shall be addressed prior to submittal of a building permit application to the Building Inspection Division: (1) A building permit for each separate structure or building is required. Submit plans, specifications and supporting calculations, prepared by a Registered Design Professional (a licensed architect or registered engineer) for each structure or building, showing compliance with the 2013 California Building, Mechanical, Plumbing, Electrical, Energy and Fire Codes as may be applicable. Plans for the different buildings or structures may be combined into a single set of construction documents. The Registered Design Professional will also be able to help you make decisions about construction options related to fire sprinklers, allowable areas, firewalls and any necessary upgrades based on the configuration of the building and your specific needs. (2) The required plans must be complete at the time of submittal for a building permit. Plans must address building design and construction, fire and life safety requirements, accessibility and show compliance with the current California codes and San Joaquin County ordinances. A complete set of plans must include fire sprinkler plans, truss calculations, energy calculations, plumbing, electrical and mechanical drawings as well as structural calculations. (3) The existing Residence and Patio Cover proposed for use as a Fellowship Hall will be a change in occupancy from Occupancy Group R to Occupancy Group A-3. A change in occupancy will require a code analysis report and necessary plans prepared by an architect or engineer in accordance with Section 3408 of the CBC. The report and plans shall identify existing conditions, propose alterations necessary to bring the building in compliance with the current code and include the following: (i) Description of proposed use (ii) Existing and proposed occupancy Groups (iii) Type of construction (iv) Sprinklers(Yes or No (v) Number of stories (vi) Building height (vii)Allowable floor area (viii)Proposed floor area (ix) Occupant load based on the CBC (4) Modifications to existing buildings are required to include upgrades related to disability access pursuant to Section 1134B of the CBC. Plans showing these upgrades must be prepared by a registered engineer or licensed architect and shall be submitted for review and approval prior to issuance of a building permit (5) Accessible routes shall be provided per CBC Section 11B-206. At least one accessible route shall be provided within the site from accessible parking spaces and accessible passenger loading zones; public streets and sidewalks; and public transportation stops to the accessible building or facility entrance they serve. Where more than one route is provided, all routes must be accessible. §11 B-206.2.1 At least one accessible route shall connect accessible buildings, accessible facilities, accessible elements, and accessible spaces that are on the same site. § 11 B-206.2.2 (6) Parking spaces will be required to accommodate persons with disability in compliance with Chapter 11B of the California Building Code. These parking space(s) shall be located as close as possible to the primary entrance to the building. Note, an additional accessible parking space PA-1600060 (SA) Conditions of Approval 3