SU0006063 - Laserfiche WebLink

Home Browse Search

Ms Allen d June 19, 2006 PA-0600296(SA) Page 2 Rule 2280 (Portable Equipment Registration) As of May 1, 1994, all portable emission units (including portable drilling rigs) are required to register with the District or the California Air Resources Board (CARB). Should this project require the installation of an air stripping operation, and/or an auxiliary diesel or natural gas engine greater than fifty (50) brake horsepower, application for an Authority to Construct may be required. Any question pertaining to District permitting or registration requirements should be directed to our Permit Services division at (209) 557-6400. Rule 4002 (National Emission Standards for Hazardous Air Pollutants) In the event that any portion of an existing building will be renovated, partially demolished or removed, the project will be subject to District Rule 4002 Prior to any demolition activity, an asbestos survey of existing structures on the project site may be required to identify the presence of any asbestos containing building material (ACBM). Any identified ACBM having the potential for disturbance must be removed by a certified asbestos contractor in accordance with CAL-OSHA requirements. If you have any questions concerning asbestos related requirements, please contact Mr. Joe Avila of this office at (559) 230-5951, Ms. Jan Sudomier at (209) 557-6422, Mr. Sherman Yount at (661) 326-6933 or contact CAL-OSHA at (559) 454-1295. The District's Asbestos Requirements Bulletin can be found online at http://valleyair.org/busind/comply/asbestosbuitn.htm. Rule 4101 (Visible Emissions) This rule prohibits emissions of visible air contaminants to the atmosphere and applies to any source operation that emits or may emit air contaminants. The applicant must contact the District's Small Business Assistance Office at (209) 557-6446 / (559) 230-5888 / (661) 326-6969 to receive additional information/instructions. Rule 4102 (Nuisance) This rule applies to any source operation that emits or may emit air contaminants or other materials. In the event that the project or construction of the project creates a public nuisance, it could be in violation and be subject to District enforcement action. Rule 4201 (Particulate Matter Concentration) This rule establishes a particulate matter emission standard and applies to any source operation that emits or may emit dust, fumes, or total suspended particulate matter. Rule 4202 (Particulate Matter Emission Rate) This rule establishes allowable emission rates and applies to any source operation that emits, or may emit, particulate matter emissions. Rule 4601 (Architectural Coatings) This rule limits volatile organic compounds from architectural coatings by specifying architectural coatings storage, clean up and labeling requirements and applies to any person who supplies, sells, offers for sale, applies, or solicits the application of any architectural coating. Rule 4641 (Cutback, Slow Cure, and Emulsified Asphalt, Paving and Maintenance Operations) If asphalt paving will be used, then paving operations of this project will be subject to Rule 4641. This rule applies to the manufacture and use of cutback asphalt, slow cure asphalt and emulsified asphalt for paving and maintenance operations District staff is available to meet with you and/or the applicant to further discuss the regulatory requirements that are associated with this project. If you have any questions or require further information, please call me at (559) 230-5800 or Mr. Dave Mitchell, Planning Manager, at (559) 230-5807 and provide the reference number at the top of this letter. Sincerely, Debra Monterroso Senior Air Quality Specialist Central Region DM cxt Enclosures