Laserfiche WebLink
1. A building permit for each separate structure or building is required. Submit plans, <br /> Specifications and supporting calculations, prepared by a Registered Design Professional <br /> (architect or engineer) for each structure or building, showing compliance withThe 2016 <br /> California Building, Existing Building, Mechanical, Plumbing, Electrical, Energy and Fire <br /> Codes as may be applicable. Plans for the different buildings or structures may be <br /> combined into a single set of construction documents. <br /> 2. A grading permit will be required for this project. Submit plans and grading calculations, <br /> including a statement of the estimated quantities of excavation and fill, prepared by a <br /> Registered Design Professional.The grading plan shall show the existing grade and finished <br /> grade in contour intervals of sufficient clarity to indicate the nature and extent of the work <br /> and show in detail that it complies with the requirements of the code. The plans shall show <br /> the existing grade on adjoining properties insufficient detail to identify how grade changes <br /> will conform to the requirements of the code. <br /> 3. The required plans must be complete at the time of submittal for a building permit. Plans <br /> must address building design and construction, fire and life safety requirements, accessibility <br /> and show compliance with the current California codes and San Joaquin County ordinances. <br /> A complete set of plans must include fire sprinkler plans, truss design submittals, metal <br /> building shop drawings, structural plans and calculations, plumbing, electrical and <br /> mechanical drawings and energy report. <br /> 4. A soils report is required pursuant to CBC§ 1803 for foundations and CBC appendix§J104 <br /> for foundations. All recommendations of the Soils Report shall be incorporated into the <br /> construction drawings. <br /> 5. For each proposed new building, provide the following information on the plans: <br /> a. Description of proposed use <br /> b. Existing and proposed occupancy Groups <br /> c. Type of construction <br /> d. Sprinklers(Yes or No <br /> e. Number of stories <br /> f. Building height <br /> g. Allowable floor area <br /> h. Proposed floor area <br /> L Occupant load based on the CBC <br /> j. Occupant load based on the CPC <br /> 6. Building 1 shall be provided with an automatic fire sprinkler system or separated into <br /> conforming fire areas. <br /> 7. If high piled combustible storage is to be used in a building, an automatic fire sprinkler <br /> system will be required per CBC Section 413 and the California Fire Code. <br /> PA-1700077 (SA) Conditions of Approval 3 <br />