Laserfiche WebLink
witn factory slotted 0.010 inca screen. Sell screens <br /> will be 15 feet in lengta and installed •.pith approx- <br /> mately five feet of screen above the water table. <br /> These wells will be developed by surge block and pumping. <br /> 2. Obtain water and product level measurements. All wells <br /> will be surveyed to determine casing elevations. Wells - <br /> will be sounded to determine water elevation and pro- <br /> duct elevations, if any, in order to determine the <br /> direction of groundwater and product flow. <br /> 3. Sample the three monitoring wells. At least 24 hours <br /> after completion of the monitoring wells, immediately <br /> after water and product elevations are determined, <br /> all three wells will be sampled with a bailer for <br /> product. If no product is present, the wells will be <br /> purged and water samples collected. Samples will be <br /> analyzed for volatile aromatics (EPA 602), poly- <br /> nuclear aromatics (EPA 610), phthalate esters <br /> (EPA 606), and total hydrocarbons (by GC/FID). Bailer <br /> and analytical results will determine the presence of <br /> both free product and water contamination, thus <br /> producing an estimate of the extent of product and <br /> ground water contamination. <br /> After completion of the above tasks , a report will be submitted <br /> presenting all data, conclusions, and proposals for additional <br /> work. <br /> • 11 • <br />