INSTALL_2009 - Laserfiche WebLink

Home Browse Search

Secondary Containment Vacuum Sensing System Maximize protection with a vacuum monitored secondary containment system. A Secondary Containment Vacuum Features and Benefits Facilitates periodic operability testing Sensing System for use with Veeder- Satisfy Requirements Leverage Existing Vecder-Root Systems Roots ATG Systems. The Secondary . Certified to meet California's requirement for . Uses STP as the Vacuum source and works with secondary space monitoring for tanks and lines Red jacket and IT STPs Containment Vacuum Sensing (SCVS) as required by AB 2481 . Instlls in the STP sump and connects to the System is designed to detect leaks in double- . Satisfies the requirements for Class I Leak walled tanks and piping systems while Detection as defined by the European console viae wiring colly safe wiring Standard EN 13160-2 Able to share wiring conduit with other helping to contain a release of product while Veeder-Root intrinsically safe(IS)probes and • 3rd Pan},National Work Group and LGl 13 under vacuum.The system consists of: listed sensors including sump or line leak sensors • Interfaces to the Smart Sensor Interface with • Vacuum Sensors,connected to tank, :Reduce Exposure to Risk Embedded Pressure Module Alarms when vacuum cannot be maintained Provides for positive shut down of pressurized sump or piping interstices lines when required • or when replenish rate exceeds 85 liters per hour A Submersible Turbine Pump(STP), Simple In The system alarms when liquid is detected in st Nation,no need to mess with brine to provide a source of vacuum the secondary space • A Smart Sensor Interface with Embedded Pressure Module in a TLS-350 Operating Temperature Rating: Console Capability Monitoring System -25 degrees C to+70 degrees C The Vacuum Sensor is compatible with the following consoles: The Vacuum Sensor is interfaced to Veeder- Cable Length: Console 8 feet TLS-350R/EMC w/BIR' Root's TLS-350 Monitoring System via TLS-350 Plus/EMC Enhanced' intrinsically safe wiring to provide system Sensor Dimensions: TLS-350/EMC" status,replenish rate,alarm,and diagnostic 5"high x 5"wide 2"deep 'Upgrade Note:The Vacuum Sensor System requires information. the console to have version 24C software(or greater) along with an ECPU2 or ECPU w/NVMEM 1 board. Standard Models Vacuum Sensor Kits are available in a variety weeder-Root P/N Description AM 330020-467 4 Vacuum Sensor Kit'for steel tank of models: 330020-468,-469,470-4.71 4 Vacuum Sensor lGt"for fiberglass tanks(4',6',8',10') 330020-486 4 Vacuum Sensor Kit'for no tank • For monitoring double-walled piping 330020-472 3 Vacuum Sensor Kit'for steel tank and sum interstices 330020-473,-474,-475,-476 3 Vacuum Sensor Kit*for fiberglass tanks(4',6',8',10') P 330020-485 3 Vacuum Sensor Nt for no tank • For monitoring double-walled steel tank 330020-479 2 Vacuum sensor Kt*for steel tank interstices(see back page) 330020-481,-482,-483,-484 2 Vacuum Sensor Ktt"for fiberglass tanks(4%6',8%10') 330020-480 2 Vacuum Sensor Ktt"for no tank • For double-walled fiberglass tanks 330020-495 1 Vacuum Sensor KV for no tank 857280-100 Vacuum Sensor for piping&sumps These kits differ in the number of vacuum 857280-200 Vacuum Sensor for steel tanks 857280-301,-302.-303,-304 Vacuum Sensor for fiberglass tanks(4',6',8',10) sensors and the configuration of associated 330020-448 Mounting Kit liquid sensors. An inline kit mounted liquid 332217-001 Relief Valve Assembly sensor is used for Vacuum Sensors 332250-001 Smart Sensor w/Embedded Pressure sensor Module(7 Channel) monitoring piping and sumps. An external Accessories Part Description Quantity/Length Part Number liquid sensor(to be installed in the seconds 1/4"NPT Barbed Fittings 3__ 330020-487 secondary 1/4"NPT Barbed Fittings 15 330020-488 space at the bottom of the tank) is provided1/4"NPT Barbed Fittings 25 _ 330020-489 with one of the Vacuum Sensors in the steel Barbed Tee 1 576008-657 Vacuum Hose 25' 25' 332310-001 and fiberglass tank kits to monitor the tank. Vacuum Hose 50' 50' _ 332310-002 Vacuum Hose 100' 100' 332310-003 3-Way Ball Valve 1 576008-649 Schrader Valve Barbed Fitting 3 330020-496 Schrader Valve Barbed Fitting 15 330020-497 Kls include mounting bracket.6'of vacuum hose,relief valve assembly(K required)and the appropriate number of liquid sensors, 3-way ball valves, barbed fittings and hose damps so that each vacuum sensor can monitor a single tank sump or piping interstices. The Vacuum Sensing System requires one 7 channel Smart Sensor Interface with Embedded Pressure Module,8 channel Smart Sensor Modules(p/n 329356-004)can be used for Vacuum Sensors eight and above. For more information call: 1-888-561-7942 VEEDER-ROOT