ARCHIVED REPORTS_XR0008921 - Laserfiche WebLink

Home Browse Search

An IT Hot Work permit must be completed and posted prior to any hot work (such as welding or cutting) on site, including hot work performed by subcontractors Fire lanes must be kept open at all tunes If fire hydrants are used as a source of water, a ' quick disconnect must be located at the hydrant Dry chemical fire extinguishers, with minimum 5A, 30BC ratings will be provided at all field work areas All vehicles shall be equipped with m n mum IA, 5BC rated fire extinguisher Any trailers used as office or work space shall be provided with at least one 2A, 30BC rated fire extinguisher In the case of a fire on the site, the FC will assess the situation and direct appropriate response activities IT personnel tramped m the use of extinguisher may attempt to extinguish ithe fire with available extinguishers, only if safe to do so I 4.2.77 Environmental Hazards Site workers should inspect protected areas (e g , pits, storage areas, debris piles and portable toilets) prior to reaching into them or entering them in any way. Stinging or biting creatures and their nests shall be avoided wherever possible, and workers shall wear long pants and gloves if necessary to protect them from bites and sharp or irritating plants Workers should also be warned to avoid disturbing fecal matter and to wash their hands prior to eating, drinking or smoking after handling dirt or debris 4.2.72 Housekeeping To minimize slip, trip and fall hazards caused by poor housekeeping, the following measures shall be taken: ' • Work areas shall be inspected daily for adequate housekeeping and findings recorded on daily inspection reports. i • All stairways, sidewalks, passageways, gangways, and accessways shall be kept free of materials, supplies and obstructions at all times • Loose or light material shall not be stored or left on roofs or floors that are not closed iii, unless safely secured. MZ(11-29-94/RHSAiASP/94-0037JAF 4-17