Laserfiche WebLink
Alaniz, John <br /> From: Alaniz, John <br /> Sent: Friday, January 24, 2020 2:18 PM <br /> To: 'Gary Reeves'; 'Krueg Ed' <br /> Cc: Backus, Garrett <br /> Subject: RE: Hienz reports <br /> Hi Ed and Gary, <br /> I reviewed the phase 1 assessment. The type of permit marked on the first page is permit by rule. Our records indicate <br /> that Heinz has a CA permit. The proper one needs to be marked. <br /> Thank You, <br /> John Alaniz <br /> REHS <br /> San Joaquin County <br /> Environmental Health Department <br /> 1868 E Hazelton Avenue <br /> Stockton, California 95205 <br /> Phone: (209)468-3147 <br /> Fax: (209) 468-3433 <br /> Please note, my email address has changed to jalanizl@sjgov.org. <br /> From:Alaniz,John <br /> Sent: Friday,January 24, 2020 1:04 PM <br /> To: 'Gary Reeves'<gary@garyreevesllc.org>; Krueg Ed <Ed.Krueg@kraftheinz.com> <br /> Cc: Backus, Garrett<gbackus@sjgov.org> <br /> Subject: RE: Hienz reports <br /> I Ed and Gary, <br /> I have reviewed the hazardous waste tank assessment and had several questions and concerns. Below are the <br /> requirements for a hazardous waste tank assessment. Several of the items (highlighted) were not observed in the <br /> assessment or not enough information was provided to meet to requirements of Title 22. No calculations were <br /> observed for the secondary containment. Other things required such as rainfall were not addressed. In addition,the <br /> tank does need to be tested for system integrity/leak testing. <br /> Title 22 California Code of Regulations section 66265.192(k) <br /> The tank system assessment shall include all of the following information: <br /> (1)tank configuration (i.e., horizontal,vertical), material of construction, and gross capacity (in gallons); <br /> (2) design standard(s), if available, according to which the tank and ancillary equipment were or will be constructed <br /> and all of the following information: <br /> (A) material of construction; <br /> (B) material thickness and the method used to determine the thickness; <br /> (C) description of tank system piping (material, diameter); <br /> (D) description of any internal and external pumps; and <br /> i <br />