Laserfiche WebLink
r <br /> BITE HEALTH & SAFETY PLAN <br /> C. REQUIRED PROTECTION <br /> It is anticipated that level D work clothing will be <br /> worn during the tank removal phase of the project. <br /> (Unless any liquids are encountered, then personnel will <br /> upgrade to level C, P. E. Tyvek or similar) . In <br /> addition, however, the personnel working on the project <br /> will be required to wear surgical under gloves (latex) , <br /> and chemical outer gloves. As the project involves the <br /> removal of underground storage tanks, and the taking of <br /> soil samples, the potential exposure anticipated is with <br /> the contact with potentially contaminated soils. <br /> Historical information indicates the possibilities of <br /> encountering fuels from leaking lines or tanks. <br /> Should the readings with the LEL indicate the presence <br /> of contaminated materials near the TLVs of the materials <br /> analyzed, or if the colormetric tubes indicates the <br /> presence of Benzene, or if the LEL meter (set in ppm <br /> reading range) indicates vapor readings approaching the <br /> 75-100 ppm range of total organic compounds, the <br /> personnel assigned to the project will upgrade their <br />. personal protection with appropriate clothing and <br /> respiratory protective equipment. That equipment will <br /> include the selection of the proper cartridges for the <br /> anticipated exposure. <br /> Walton Engineering, Inc. and "Environmental Consultant'O <br /> will provide their employees with appropriate personal <br /> protective equipment as required. If respirators are <br /> deemed necessary, only NIOSH/MSHA certified respiratory <br /> protective equipment will be utilized. Walton <br /> Engineering, Inc. subcontractor(s) are responsible to <br /> supply the appropriate safety equipment for their own <br /> employees. <br /> 9 <br />