Laserfiche WebLink
F <br /> • GR Field Methods and Procedures <br /> Groundwater Monitonng and Sampling <br /> Decontamination Procedures <br /> All physical parameter measuring and sampling equipment are decontaminated prior to sample collection using <br /> Alconox or equivalent detergent followed by steam cleaning with deiomzed water During field sampling, <br /> equipment placed in a well are decontaminated before purging or sampling the next well by cleaning with Alconox <br /> or equivalent detergent followed by steam cleaning with deiomzed water <br /> Water-Level Measurements <br /> Prior to sampling each well, the static water level is measured using an electric sounder and/or calibrated portable <br /> oil-water interface probe Both static water-level and separate-phase product thickness are measured to the nearest <br /> ;b0 01 foot The presence of separate-phase product is confirmed using a clean, acrylic or polyvinylchloride (PVC) <br /> bailer, measured to the nearest t0 01 foot with a decimal scale tape The monofilament line used to lower the <br /> bailer is replaced between borings with new line to preclude the possibility of crass-contamination Field <br /> observations (e g product color, turbidity, water color, odors, etc) are noted Water-levels are measured in wells <br /> with known or suspected lowest dissolved chemical concentrations to the highest dissolved concentrations <br /> Sample Collection and Labeling <br /> A temporary PVC screen is installed in the boring to facilitate a grab groundwater sample collection Samples of <br /> groundwater are collected from the surface of the water in each well or boring using the teflon bailer or a pump <br /> The water samples are then gently poured into laboratory-cleaned containers and sealed with teflon-lined caps, and <br /> inspected for air bubbles to check for headspace The samples are then labeled by an adhesive label, noted in <br /> permanent ink, and promptly placed in an ice storage A Chain-of-Custody Record is initiated and updated <br /> throughout handling of the samplcs, and accompanies the samples to the laboratory certified by the State of <br /> California for analyses requested <br /> 3 <br /> A-3 <br />