SITE INFORMATION AND CORRESPONDENCE

Home Browse Search

• • Page 2 of 5 some concerns with your submittal packet: 1-Our permit application is two pages. The second page, the Licensed Contractor Declaration (LCD) that contains an area for the C-57 to authorize your signature on page one is NOT here. I can not issue the permit w/o the C-57's authorization for-you to sign. See attached WELL-PERMIT-APPL.PDF file 2-additionally, a map (a single map) is needed that shows all the areas the borings/wells are to be placed. you have sent in five maps and not one shows all the borings on it. Please provide one single map, on a 8.5" X 11" page, that shows all 15? 16 borings. also clarify the correct number of borings please. Plan says 16, your application shows only 15. The 15 locations are shown on the attached figure Koppel_sample_locations.pdf.There are 15 locations with a total of 64 borings. Soil sample areas 1K through 7K have 8 borings at each location, with each boring to 6 feet bgs(total of 56 borings). Locations K11-01 to K11-08 are locations with only 1 boring at each location to 15 feet bgs (8 borings). So a total of 64 borings. 3- 'temporary monitoring points' are mentioned in the plan. you need to further explain how LONG temporary is. ANY and EVERY hole, temp or not, left in the ground AFTER you/your tech/the driller leaves the site for the night is a WELL. your permit application is not adequate for wells. as submitted, your permit application is only to be valid for BORINGS....holes that are destroyed at the end of each day. In order to issue this permit, you will need to clari /call out that NO boring-will be left open/u ig routed overnight. If you have plans to keep points open over night, you are to provide a surface seal, a casing securing/locking device and a mechanically fastened valutl/box. Each well is $122 for permit purposes and will require a plan for destruction to be approved by the EHD for its destruction. NO borings will be left open overnight. All borings advanced each day will be grouted prior to the driller departing site for the evening. 4 you do not mention how you will destroy/abandonthe holes/monitoringoints. this needs to be clarified. Materials used are to be discussed in the work plan. The holes will be grouted to the surface with neat cement. For the 6-foot borings not into groundwater grout will be poured from the surface, as long as the borings remain open. For the 15-foot borings, which we anticipate to be in groundwater, will be tremie grouted. For the 15-foot borings the pre-packed screen will be pulled from the boring and then a tremie sent back down the boring for grouting, as long as the boring remains open. If borings collapse then the direct push rig will be used to advance rod to the total depth of the boring and grout back out either through the drill rod or by placing a tremie. 5- please explain the fee amount you sent in for the permit. BORING permits for one parcel are $488. ($366 plus $122 for BORINGS). You have sent in $732. Do you have some reason for the extra $366 being submitted? When we spoke before you said since boring are on three different parcels that are in the same area that I need to submit $366 plus $122 for each of the three parcels. The three parcels are outlined on the attached figure for your reference. hopefully you can now see why the EHD requires 10 working days to process permits. many items are typically missing or inaccurate and it takes time for you to forward the correct materials to us. If I told you July 5 as the latest date for you to submit, this date was offered to you as the last date for all the correct submittals be here. for future planning, it's ok to provide more than four working days for the EHD to process your submittals. there is no problem with the permit being issued months/weeks before the start date. It is valid for one year after issue. 7/5/2011